S-1132B24-I6T2G

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Power Management IC
• Characteristics: Low Dropout Voltage Regulator
• Package: SOT-23-5
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Input Voltage Range: 2.0V to 6.0V
• Output Voltage Range: 1.2V to 5.5V
• Maximum Output Current: 300mA
• Dropout Voltage: 200mV (typical) at 100mA
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1132B24-I6T2G has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. VOUT: Output voltage pin 4. CE: Chip enable pin 5. NC: No connection pin

Functional Features

• Low dropout voltage: The S-1132B24-I6T2G exhibits a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
• Low quiescent current: With a typical quiescent current of only 30µA, this IC minimizes power consumption during standby or idle modes.
• Overcurrent protection: The device incorporates overcurrent protection, safeguarding the circuit from excessive current flow and potential damage.
• Thermal shutdown protection: In case of excessive temperature rise, the IC automatically shuts down to prevent overheating and subsequent failure.

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient power conversion. - Low quiescent current minimizes power consumption. - Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages: - Limited maximum output current of 300mA may not be suitable for high-power applications. - Restricted input voltage range of 2.0V to 6.0V may limit compatibility with certain systems.

Working Principles

The S-1132B24-I6T2G is a low dropout voltage regulator that maintains a stable output voltage despite variations in the input voltage. It achieves this by utilizing a precision reference voltage, error amplifier, and pass transistor. The error amplifier continuously compares the output voltage with the reference voltage and adjusts the pass transistor accordingly to maintain the desired output voltage.

Detailed Application Field Plans

The S-1132B24-I6T2G finds application in various electronic devices where a stable and regulated power supply is required. Some potential application fields include: 1. Battery-powered devices: Portable electronics such as smartphones, tablets, and wearable devices can benefit from the low dropout voltage and low quiescent current of this IC. 2. IoT devices: Internet of Things (IoT) devices often operate on limited power sources. The S-1132B24-I6T2G can provide efficient power management in these applications. 3. Industrial equipment: Control systems, sensors, and other industrial equipment can utilize this IC for reliable power regulation.

Detailed and Complete Alternative Models

1. S-1132B25-I6T2G: Similar to S-1132B24-I6T2G but with a higher maximum output current of 500mA.
2. S-1132B23-I6T2G: Similar to S-1132B24-I6T2G but with a lower maximum output current of 200mA.
3. S-1132B26-I6T2G: Similar to S-1132B24-I6T2G but with a wider input voltage range of 1.8V to 6.5V.

(Note: These alternative models are provided for reference and may have different specifications and characteristics.)

In conclusion, the S-1132B24-I6T2G is a low dropout voltage regulator IC that offers efficient power management, low quiescent current, and various protection features. Its compact package and compatibility with different application fields make it a versatile choice for electronic devices requiring stable power supply.