ABLIC U.S.A. Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S-1135D26-A6T1U
Ver Detalle Hojas de datos

S-1135D26-A6T1U

Product Overview

Category

S-1135D26-A6T1U belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • Package: The S-1135D26-A6T1U comes in a compact surface-mount package.
  • Essence: It is a low-dropout voltage regulator with high accuracy and low power consumption.
  • Packaging/Quantity: The product is typically packaged in reels and available in large quantities.

Specifications

The specifications of the S-1135D26-A6T1U are as follows:

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage Range: 0.8V to 5.0V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of the S-1135D26-A6T1U is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

The S-1135D26-A6T1U offers the following functional features:

  • Low dropout voltage: Provides stable output even when the input voltage is close to the output voltage.
  • High accuracy: Ensures precise regulation of the output voltage.
  • Low power consumption: Minimizes energy wastage during operation.
  • Overcurrent protection: Safeguards the circuit from excessive current flow.

Advantages and Disadvantages

Advantages: - Compact size and surface-mount package make it suitable for space-constrained applications. - Wide input voltage range allows flexibility in various electronic circuits. - Low dropout voltage ensures efficient power conversion.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Operating temperature range may restrict usage in extreme environments.

Working Principles

The S-1135D26-A6T1U operates based on the principle of a low-dropout voltage regulator. It regulates the output voltage by maintaining a constant voltage difference between the input and output terminals, ensuring a stable output even when the input voltage fluctuates.

Detailed Application Field Plans

The S-1135D26-A6T1U finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the S-1135D26-A6T1U are: - S-1133D/S-1134D series from the same manufacturer - LM1117 series from Texas Instruments - MCP1700 series from Microchip Technology

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 305 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-1135D26-A6T1U en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S-1135D26-A6T1U in technical solutions:

Q1: What is S-1135D26-A6T1U? A1: S-1135D26-A6T1U is a specific model of voltage regulator IC (integrated circuit) used for regulating voltage in various electronic devices.

Q2: What is the input voltage range of S-1135D26-A6T1U? A2: The input voltage range of S-1135D26-A6T1U is typically between 2.0V and 6.0V.

Q3: What is the output voltage range of S-1135D26-A6T1U? A3: The output voltage range of S-1135D26-A6T1U can be adjusted from 0.8V to 5.5V using external resistors.

Q4: What is the maximum output current of S-1135D26-A6T1U? A4: The maximum output current of S-1135D26-A6T1U is 100mA.

Q5: What are the typical applications of S-1135D26-A6T1U? A5: S-1135D26-A6T1U is commonly used in battery-powered devices, portable electronics, IoT devices, and other low-power applications.

Q6: Does S-1135D26-A6T1U have built-in protection features? A6: Yes, S-1135D26-A6T1U includes overcurrent protection, thermal shutdown, and short-circuit protection to ensure safe operation.

Q7: Can S-1135D26-A6T1U operate in a wide temperature range? A7: Yes, S-1135D26-A6T1U is designed to operate in a temperature range of -40°C to +85°C.

Q8: Is S-1135D26-A6T1U compatible with both ceramic and tantalum capacitors? A8: Yes, S-1135D26-A6T1U can be used with both ceramic and tantalum capacitors for stability and filtering purposes.

Q9: Does S-1135D26-A6T1U require any external components for operation? A9: Yes, S-1135D26-A6T1U requires a few external components such as input/output capacitors and resistors for voltage adjustment.

Q10: Can S-1135D26-A6T1U be used in automotive applications? A10: No, S-1135D26-A6T1U is not specifically designed for automotive applications and may not meet the required automotive standards.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.