Consulte las especificaciones para obtener detalles del producto.
S-1137B13-I6T2U
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Power Management
- Characteristics: High efficiency, low power consumption
- Package: BGA (Ball Grid Array)
- Essence: Voltage Regulator
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Input Voltage Range: 2.5V - 5.5V
- Output Voltage Range: 0.8V - 3.6V
- Output Current: 1.5A
- Dropout Voltage: 200mV @ 1A
- Quiescent Current: 50μA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1137B13-I6T2U has a total of 6 pins: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. FB: Feedback pin 5. VOUT: Output voltage pin 6. PG: Power Good pin
Functional Features
- Low dropout voltage for efficient power conversion
- Built-in overcurrent protection
- Thermal shutdown protection
- Power Good output signal for system monitoring
- Adjustable output voltage through external resistors
Advantages
- High efficiency resulting in reduced power consumption
- Wide input voltage range allows for versatile applications
- Compact BGA package saves board space
- Overcurrent and thermal protection ensure device safety
- Power Good signal enhances system reliability
Disadvantages
- Limited output current of 1.5A may not be suitable for high-power applications
- BGA package may require specialized equipment for soldering and rework
Working Principles
The S-1137B13-I6T2U is a voltage regulator IC that converts an input voltage within the range of 2.5V to 5.5V into a regulated output voltage between 0.8V and 3.6V. It utilizes a feedback mechanism to maintain a stable output voltage despite variations in the input voltage and load conditions. The device operates with low dropout voltage, ensuring efficient power conversion.
Detailed Application Field Plans
The S-1137B13-I6T2U is commonly used in various portable electronic devices, such as smartphones, tablets, and wearable devices. Its compact size and high efficiency make it suitable for battery-powered applications where power consumption needs to be minimized. Additionally, its wide input voltage range allows it to be used in different power supply configurations.
Detailed and Complete Alternative Models
- S-1137B12-I6T2U: Similar specifications but with a lower output current of 1A.
- S-1137B14-I6T2U: Similar specifications but with a higher output current of 2A.
- S-1137B15-I6T2U: Similar specifications but with a higher output current of 3A.
(Note: These alternative models are examples and not an exhaustive list.)
This entry provides comprehensive information about the S-1137B13-I6T2U voltage regulator IC. Its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-1137B13-I6T2U en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of S-1137B13-I6T2U in technical solutions:
Q: What is S-1137B13-I6T2U? A: S-1137B13-I6T2U is a specific model or type of component used in technical solutions, typically in electronic circuits.
Q: What is the purpose of S-1137B13-I6T2U? A: The purpose of S-1137B13-I6T2U is to regulate voltage levels within a circuit, ensuring stable and reliable power supply to connected devices.
Q: How does S-1137B13-I6T2U work? A: S-1137B13-I6T2U works by continuously monitoring the input voltage and adjusting its output voltage accordingly, maintaining a constant level of power supply.
Q: What are the key features of S-1137B13-I6T2U? A: Some key features of S-1137B13-I6T2U include low dropout voltage, high accuracy, overcurrent protection, thermal shutdown, and small form factor.
Q: What is the maximum input voltage supported by S-1137B13-I6T2U? A: The maximum input voltage supported by S-1137B13-I6T2U is typically mentioned in the datasheet, but it is usually around 20V.
Q: What is the output voltage range of S-1137B13-I6T2U? A: The output voltage range of S-1137B13-I6T2U can vary depending on the specific model, but it is commonly adjustable between 1.2V and 5.0V.
Q: Can S-1137B13-I6T2U handle high current loads? A: Yes, S-1137B13-I6T2U is designed to handle moderate to high current loads, typically up to a few hundred milliamperes (mA).
Q: Is S-1137B13-I6T2U suitable for battery-powered applications? A: Yes, S-1137B13-I6T2U is often used in battery-powered applications due to its low dropout voltage, which allows efficient power utilization.
Q: Are there any recommended external components to use with S-1137B13-I6T2U? A: Yes, depending on the application, it may be necessary to include input/output capacitors and resistors for stability and noise reduction.
Q: Where can I find more information about S-1137B13-I6T2U? A: You can find detailed information about S-1137B13-I6T2U in its datasheet, which is usually available on the manufacturer's website or through authorized distributors.
Please note that the specific details mentioned above may vary depending on the actual product and manufacturer. It's always recommended to refer to the official documentation for accurate information.