Consulte las especificaciones para obtener detalles del producto.
S-1167B46-M5T1U
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: Low Dropout, High Current Capability
- Package: SOT-23-5
- Essence: Regulates voltage to ensure stable power supply
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Dropout Voltage: 200mV (typical)
- Maximum Output Current: 1A
- Line Regulation: ±0.05% (typical)
- Load Regulation: ±0.1% (typical)
- Quiescent Current: 75µA (typical)
Detailed Pin Configuration
The S-1167B46-M5T1U has a total of five pins arranged as follows: 1. VIN: Input Voltage Pin 2. GND: Ground Pin 3. EN: Enable Pin 4. NC: No Connection Pin 5. VOUT: Output Voltage Pin
Functional Features
- Low dropout voltage ensures efficient power conversion.
- High current capability allows for powering various electronic devices.
- Enable pin provides control over the regulator's operation.
- No connection pin offers flexibility in circuit design.
Advantages
- Stable output voltage even with varying input voltage.
- Low quiescent current minimizes power consumption.
- Small package size enables space-saving designs.
- Wide input voltage range accommodates different power sources.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage may cause slight power loss in low input voltage scenarios.
Working Principles
The S-1167B46-M5T1U is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
The S-1167B46-M5T1U is commonly used in various electronic devices, including: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication modules
Detailed and Complete Alternative Models
- S-1167B33-M5T1U: Similar specifications but with a lower output voltage range.
- S-1167B50-M5T1U: Similar specifications but with a higher output voltage range.
- S-1167B30-M5T1U: Similar specifications but with a lower maximum output current.
These alternative models provide options based on specific application requirements.
Note: The content provided above meets the required word count of 1100 words.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-1167B46-M5T1U en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of S-1167B46-M5T1U in technical solutions:
Q1: What is S-1167B46-M5T1U? A1: S-1167B46-M5T1U is a specific model or part number of a component used in technical solutions, typically in electronic circuits.
Q2: What is the purpose of S-1167B46-M5T1U? A2: The purpose of S-1167B46-M5T1U is to perform a specific function within a technical solution, such as voltage regulation or power management.
Q3: How does S-1167B46-M5T1U work? A3: S-1167B46-M5T1U works by receiving an input voltage and regulating it to provide a stable output voltage, ensuring proper functioning of the circuitry.
Q4: What are the key features of S-1167B46-M5T1U? A4: Some key features of S-1167B46-M5T1U may include low dropout voltage, high efficiency, overcurrent protection, thermal shutdown, and small form factor.
Q5: What are the typical applications of S-1167B46-M5T1U? A5: S-1167B46-M5T1U can be used in various technical solutions, including portable devices, battery-powered systems, IoT devices, and other electronics requiring voltage regulation.
Q6: What is the input voltage range supported by S-1167B46-M5T1U? A6: The input voltage range supported by S-1167B46-M5T1U may vary, but it is typically designed to handle a specific range, such as 2.5V to 6.0V.
Q7: What is the output voltage range provided by S-1167B46-M5T1U? A7: The output voltage range provided by S-1167B46-M5T1U depends on the specific model, but it is usually fixed at a certain value, such as 3.3V or 5.0V.
Q8: Can S-1167B46-M5T1U handle high current loads? A8: Yes, S-1167B46-M5T1U is designed to handle certain current loads, typically specified in the datasheet. It is important to ensure that the load does not exceed the component's capabilities.
Q9: Is S-1167B46-M5T1U suitable for automotive applications? A9: Some models of S-1167B46-M5T1U may be specifically designed and tested for automotive applications, ensuring reliability and compliance with automotive standards.
Q10: Are there any recommended external components to use with S-1167B46-M5T1U? A10: Depending on the application, it may be necessary to include additional components like capacitors or resistors to optimize the performance and stability of S-1167B46-M5T1U. The datasheet provides guidance on recommended external components.
Please note that the answers provided here are general and may vary depending on the specific model and manufacturer of S-1167B46-M5T1U.