Consulte las especificaciones para obtener detalles del producto.
S-1206B17-M3T1G
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: Small size, high efficiency, low power consumption
- Package: SOT-23
- Essence: Step-down voltage regulator
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage: 1.7V
- Output Current: 200mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1206B17-M3T1G has three pins: 1. Pin 1: VIN (Input Voltage) 2. Pin 2: GND (Ground) 3. Pin 3: VOUT (Output Voltage)
Functional Features
- Step-down voltage regulation
- Low dropout voltage
- Low quiescent current
- Overcurrent protection
- Thermal shutdown protection
Advantages
- Small size allows for space-saving designs
- High efficiency reduces power consumption
- Wide input voltage range provides flexibility in various applications
- Overcurrent and thermal shutdown protection ensure device safety
Disadvantages
- Limited output current may not be suitable for high-power applications
- SOT-23 package may require additional heat dissipation measures in certain cases
Working Principles
The S-1206B17-M3T1G is a step-down voltage regulator that converts higher input voltages to a lower, regulated output voltage. It operates by using an internal control circuit to adjust the duty cycle of a switching transistor, which controls the amount of energy transferred from the input to the output. This regulation process ensures a stable output voltage despite variations in the input voltage.
Detailed Application Field Plans
The S-1206B17-M3T1G is commonly used in various electronic devices and systems, including: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable devices - Embedded systems
Detailed and Complete Alternative Models
- S-1206B17-M3T1U: Same specifications but with a different package (SOT-323)
- S-1206B17-M3T1W: Same specifications but with a different package (SOT-523)
- S-1206B17-M3T1H: Same specifications but with a different package (SOT-89)
Note: These alternative models have similar electrical characteristics but differ in package size and pin configuration.
Word count: 305 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-1206B17-M3T1G en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of S-1206B17-M3T1G in technical solutions:
Q1: What is S-1206B17-M3T1G? A1: S-1206B17-M3T1G is a specific model number for a surface mount Schottky Barrier Rectifier diode.
Q2: What is the maximum forward voltage drop of S-1206B17-M3T1G? A2: The maximum forward voltage drop of S-1206B17-M3T1G is typically around 0.45 volts.
Q3: What is the maximum reverse voltage rating of S-1206B17-M3T1G? A3: The maximum reverse voltage rating of S-1206B17-M3T1G is 70 volts.
Q4: What is the maximum forward current rating of S-1206B17-M3T1G? A4: The maximum forward current rating of S-1206B17-M3T1G is 1 ampere.
Q5: What is the package type of S-1206B17-M3T1G? A5: S-1206B17-M3T1G comes in a small surface mount SOD-123 package.
Q6: What applications can S-1206B17-M3T1G be used for? A6: S-1206B17-M3T1G can be used in various applications such as power supplies, voltage clamping circuits, reverse polarity protection, and battery charging circuits.
Q7: Is S-1206B17-M3T1G suitable for high-frequency applications? A7: Yes, S-1206B17-M3T1G has a fast switching speed and low capacitance, making it suitable for high-frequency applications.
Q8: Does S-1206B17-M3T1G have any temperature limitations? A8: S-1206B17-M3T1G has an operating temperature range of -65°C to +150°C.
Q9: Can S-1206B17-M3T1G handle high surge currents? A9: Yes, S-1206B17-M3T1G has a high surge current capability, which makes it suitable for handling transient overvoltage conditions.
Q10: Are there any recommended soldering guidelines for S-1206B17-M3T1G? A10: Yes, it is recommended to follow the manufacturer's soldering guidelines, such as using a reflow soldering process with appropriate temperature profiles to ensure proper solder joint integrity.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer recommendations for S-1206B17-M3T1G.