ABLIC U.S.A. Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S-812C25AMC-C2FT2U
Ver Detalle Hojas de datos

S-812C25AMC-C2FT2U

Product Overview

Category

S-812C25AMC-C2FT2U belongs to the category of voltage regulators.

Use

This product is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Package: The S-812C25AMC-C2FT2U comes in a compact surface-mount package.
  • Essence: It is a low dropout voltage regulator with a fixed output voltage.
  • Packaging/Quantity: The product is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

The specifications of the S-812C25AMC-C2FT2U are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.5V
  • Dropout Voltage: 160mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C25AMC-C2FT2U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low Dropout Voltage: The S-812C25AMC-C2FT2U exhibits a low dropout voltage, ensuring efficient voltage regulation even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: With a low quiescent current, this voltage regulator minimizes power consumption in standby or idle modes.
  • Short Circuit Protection: The device incorporates short circuit protection, safeguarding the circuit from damage in case of a short circuit condition.
  • Thermal Shutdown Protection: In the event of excessive heat, the S-812C25AMC-C2FT2U features thermal shutdown protection, preventing damage to the regulator.

Advantages and Disadvantages

Advantages

  • Compact package size allows for space-saving designs.
  • Low dropout voltage ensures efficient voltage regulation.
  • Low quiescent current minimizes power consumption.
  • Short circuit and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited output current of 150mA may not be suitable for high-power applications.
  • Fixed output voltage may restrict flexibility in certain designs.

Working Principles

The S-812C25AMC-C2FT2U operates based on the principle of a linear voltage regulator. It regulates the input voltage to a fixed output voltage by utilizing a pass transistor and feedback mechanism. The pass transistor adjusts its resistance to maintain a constant output voltage despite variations in the input voltage or load conditions.

Detailed Application Field Plans

The S-812C25AMC-C2FT2U finds application in various electronic devices and circuits, including but not limited to:

  1. Battery-powered portable devices
  2. IoT (Internet of Things) devices
  3. Wearable electronics
  4. Consumer electronics
  5. Industrial control systems

Detailed and Complete Alternative Models

  1. S-812C25AMC-C4FT2U: Similar to S-812C25AMC-C2FT2U, but with a different package type.
  2. S-812C25AMC-C3FT2U: Similar to S-812C25AMC-C2FT2U, but with a higher output current capability.
  3. S-812C25AMC-C1FT2U: Similar to S-812C25AMC-C2FT2U, but with a lower dropout voltage.

These alternative models provide options with varying specifications to suit different design requirements.

Word count: 411 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-812C25AMC-C2FT2U en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S-812C25AMC-C2FT2U in technical solutions:

  1. Q: What is the S-812C25AMC-C2FT2U? A: The S-812C25AMC-C2FT2U is a voltage regulator IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the input voltage range for the S-812C25AMC-C2FT2U? A: The input voltage range for this IC is typically between 2.5V and 16V.

  3. Q: What is the output voltage of the S-812C25AMC-C2FT2U? A: The output voltage of this IC is fixed at 2.5V.

  4. Q: What is the maximum output current of the S-812C25AMC-C2FT2U? A: The maximum output current of this IC is typically 150mA.

  5. Q: What is the purpose of using the S-812C25AMC-C2FT2U in a technical solution? A: The S-812C25AMC-C2FT2U is commonly used as a voltage regulator to provide a stable and regulated 2.5V power supply in various electronic applications.

  6. Q: Can the S-812C25AMC-C2FT2U be used in battery-powered devices? A: Yes, the low dropout voltage of this IC makes it suitable for battery-powered devices where efficient power management is required.

  7. Q: Is the S-812C25AMC-C2FT2U capable of handling overcurrent or short-circuit conditions? A: Yes, this IC has built-in protection features such as overcurrent protection and thermal shutdown to safeguard against such conditions.

  8. Q: Can the S-812C25AMC-C2FT2U be used in automotive applications? A: Yes, this IC is designed to meet automotive standards and can be used in various automotive electronic systems.

  9. Q: Does the S-812C25AMC-C2FT2U require any external components for operation? A: Yes, this IC requires a few external components such as input/output capacitors and resistors for proper operation.

  10. Q: Are there any specific precautions to consider when using the S-812C25AMC-C2FT2U? A: It is recommended to follow the manufacturer's datasheet and application notes for proper circuit design and layout considerations to ensure optimal performance and reliability of the IC.