ABLIC U.S.A. Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S-812C35AY-Z2-U
Ver Detalle Hojas de datos

S-812C35AY-Z2-U

Product Overview

Category

S-812C35AY-Z2-U belongs to the category of voltage regulators.

Use

This product is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Input Voltage Range: 1.8V to 6.0V
  • Output Voltage Range: 1.0V to 5.5V
  • Maximum Output Current: 300mA
  • Low Dropout Voltage: 160mV (at 100mA)
  • Standby Current: 0.1µA (typ.)
  • Package Type: SOT-89-5
  • Operating Temperature Range: -40°C to +85°C

Package and Quantity

The S-812C35AY-Z2-U comes in a SOT-89-5 package. It is available in tape and reel packaging, with a quantity of 3,000 units per reel.

Specifications

  • Input Voltage Range: 1.8V to 6.0V
  • Output Voltage Range: 1.0V to 5.5V
  • Output Current: 300mA (max.)
  • Dropout Voltage: 160mV (at 100mA)
  • Line Regulation: ±0.05% (typ.)
  • Load Regulation: ±0.2% (typ.)
  • Ripple Rejection Ratio: 70dB (typ.)
  • Quiescent Current: 80µA (typ.)
  • Shutdown Current: 0.1µA (typ.)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C35AY-Z2-U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. CE (Control Enable)
  4. VOUT (Output Voltage)
  5. VSS (Ground)

Functional Features

  • Low dropout voltage ensures efficient voltage regulation even with small input-output differentials.
  • Excellent line and load regulation characteristics provide stable output voltage under varying conditions.
  • High ripple rejection ratio minimizes the impact of noise on the output voltage.
  • Ultra-low standby current enables power-saving operation during idle periods.
  • Shutdown function allows for complete power disconnection when not in use.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile applications.
  • Compact SOT-89-5 package offers space-saving benefits.
  • Low dropout voltage ensures efficient power conversion.
  • Excellent line and load regulation characteristics provide stable output voltage.
  • Ultra-low standby current enables power-saving operation.

Disadvantages

  • Maximum output current limited to 300mA, which may not be sufficient for high-power applications.
  • Limited operating temperature range (-40°C to +85°C) may restrict usage in extreme environments.

Working Principles

The S-812C35AY-Z2-U is a voltage regulator that utilizes a PNP transistor as the pass element. It operates by comparing the output voltage with a reference voltage and adjusting the pass element accordingly to maintain a stable output voltage. The control enable pin (CE) allows for easy on/off control of the regulator.

Detailed Application Field Plans

The S-812C35AY-Z2-U is suitable for various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - Industrial equipment - Automotive electronics - Communication systems

Detailed and Complete Alternative Models

  1. S-812C33AY-Z2-U: Similar specifications, but with a lower output voltage range (1.0V to 3.3V).
  2. S-812C50AY-Z2-U: Similar specifications, but with a higher output voltage range (1.0V to 5.0V).
  3. S-812C25AY-Z2-U: Similar specifications, but with a lower output voltage range (1.0V to 2.5V).

These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific application requirements.

Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-812C35AY-Z2-U en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S-812C35AY-Z2-U in technical solutions:

1. What is the S-812C35AY-Z2-U? - The S-812C35AY-Z2-U is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.

2. What is the input voltage range for S-812C35AY-Z2-U? - The input voltage range for S-812C35AY-Z2-U is typically between 2.5V and 16V.

3. What is the output voltage of S-812C35AY-Z2-U? - The output voltage of S-812C35AY-Z2-U is fixed at 3.5V.

4. What is the maximum output current of S-812C35AY-Z2-U? - The maximum output current of S-812C35AY-Z2-U is 150mA.

5. Can S-812C35AY-Z2-U be used in battery-powered applications? - Yes, S-812C35AY-Z2-U can be used in battery-powered applications as it has low quiescent current and operates efficiently with low input voltages.

6. Is S-812C35AY-Z2-U suitable for automotive applications? - Yes, S-812C35AY-Z2-U is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

7. Does S-812C35AY-Z2-U have built-in overcurrent protection? - No, S-812C35AY-Z2-U does not have built-in overcurrent protection. External protection measures may be required.

8. Can S-812C35AY-Z2-U operate in a wide temperature range? - Yes, S-812C35AY-Z2-U can operate in a wide temperature range of -40°C to +105°C.

9. What is the package type of S-812C35AY-Z2-U? - S-812C35AY-Z2-U is available in a small SOT-89 package.

10. Can S-812C35AY-Z2-U be used in low-power IoT devices? - Yes, S-812C35AY-Z2-U can be used in low-power IoT devices as it has low quiescent current and provides stable voltage regulation.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.