ABLIC U.S.A. Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S-817B24AMC-CWNT2U
Ver Detalle Hojas de datos

S-817B24AMC-CWNT2U

Product Overview

Category

The S-817B24AMC-CWNT2U belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation: The S-817B24AMC-CWNT2U provides a stable output voltage, ensuring reliable performance of connected devices.
  • Low power consumption: This voltage regulator operates with low power consumption, making it energy-efficient.
  • Compact package: The S-817B24AMC-CWNT2U comes in a small package, allowing for space-saving integration into various electronic applications.
  • High accuracy: This voltage regulator offers high precision in maintaining the desired output voltage.

Package

The S-817B24AMC-CWNT2U is available in a surface-mount package, which facilitates easy installation on printed circuit boards (PCBs).

Essence

The essence of the S-817B24AMC-CWNT2U lies in its ability to provide stable and regulated voltage output, ensuring the proper functioning of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.

Specifications

  • Input voltage range: 4.5V - 16V
  • Output voltage: 2.4V
  • Output current: Up to 50mA
  • Dropout voltage: 160mV (typical)
  • Operating temperature range: -40°C to +85°C
  • Quiescent current: 30µA (typical)

Detailed Pin Configuration

The S-817B24AMC-CWNT2U has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Overcurrent protection: The S-817B24AMC-CWNT2U incorporates overcurrent protection, safeguarding connected devices from excessive current flow.
  • Thermal shutdown: In case of excessive temperature, the voltage regulator automatically shuts down to prevent damage.
  • Short-circuit protection: This product is equipped with short-circuit protection, ensuring the safety of the circuit and connected components.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable performance of electronic devices.
  • Low power consumption contributes to energy efficiency.
  • Compact package allows for space-saving integration.
  • High accuracy in maintaining desired output voltage.

Disadvantages

  • Limited output current capacity (up to 50mA).
  • Restricted input voltage range (4.5V - 16V).

Working Principles

The S-817B24AMC-CWNT2U operates based on a voltage regulation principle. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of variations in the input voltage.

Detailed Application Field Plans

The S-817B24AMC-CWNT2U finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  1. S-817A24AMC-CWNT2U: Similar to the S-817B24AMC-CWNT2U, but with a different output voltage of 2.4V.
  2. S-817B33AMC-CWNT2U: Offers a higher output voltage of 3.3V.
  3. S-817B12AMC-CWNT2U: Provides a lower output voltage of 1.2V.

These alternative models offer similar characteristics and functionality, but with different output voltage options to suit specific application requirements.

Word count: 446 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-817B24AMC-CWNT2U en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S-817B24AMC-CWNT2U in technical solutions:

  1. Q: What is the S-817B24AMC-CWNT2U? A: The S-817B24AMC-CWNT2U is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-817B24AMC-CWNT2U? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.

  3. Q: How does the S-817B24AMC-CWNT2U work? A: It works by comparing the input voltage with a reference voltage and providing an output signal when the voltage crosses a certain threshold.

  4. Q: What is the operating voltage range of the S-817B24AMC-CWNT2U? A: The operating voltage range of this IC is typically between 1.6V and 6.0V.

  5. Q: Can the S-817B24AMC-CWNT2U be used in battery-powered applications? A: Yes, it can be used in battery-powered applications as long as the voltage range falls within the specified operating range.

  6. Q: What is the output type of the S-817B24AMC-CWNT2U? A: The output type is an open-drain configuration, which means it requires an external pull-up resistor to provide a logic-level output.

  7. Q: Is the S-817B24AMC-CWNT2U suitable for automotive applications? A: Yes, it is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

  8. Q: Can the S-817B24AMC-CWNT2U be used in industrial control systems? A: Absolutely, it is commonly used in industrial control systems due to its reliability and accuracy in voltage monitoring.

  9. Q: Does the S-817B24AMC-CWNT2U have any built-in protection features? A: Yes, it includes features like overcurrent protection, thermal shutdown, and reverse polarity protection to ensure safe operation.

  10. Q: Are there any specific application notes or reference designs available for the S-817B24AMC-CWNT2U? A: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement this IC in their projects effectively.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of the S-817B24AMC-CWNT2U.