ABLIC U.S.A. Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S-873377AUP-0AAT2U
Ver Detalle Hojas de datos

S-873377AUP-0AAT2U

Product Overview

Category

S-873377AUP-0AAT2U belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • Compact size
  • High reliability
  • Low power consumption
  • Wide operating temperature range

Package

The S-873377AUP-0AAT2U comes in a small surface-mount package, making it suitable for space-constrained designs.

Essence

The essence of this product lies in its ability to provide precise voltage regulation and protection in electronic systems.

Packaging/Quantity

The S-873377AUP-0AAT2U is typically packaged in reels or trays, with a quantity of 3000 units per reel/tray.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: Up to 500mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-873377AUP-0AAT2U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The S-873377AUP-0AAT2U ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates built-in protection mechanisms to prevent damage due to excessive current flow.
  • Thermal shutdown: In case of overheating, the device automatically shuts down to avoid thermal damage.
  • Short-circuit protection: It safeguards the circuit by limiting current flow during a short-circuit condition.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High reliability ensures long-term operation without failure.
  • Low power consumption helps conserve energy in battery-powered applications.
  • Wide operating temperature range enables usage in extreme environmental conditions.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the device.

Working Principles

The S-873377AUP-0AAT2U operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for input voltage variations.

Detailed Application Field Plans

The S-873377AUP-0AAT2U finds applications in various electronic systems, including but not limited to: - Portable devices (e.g., smartphones, tablets) - Wearable electronics - IoT devices - Battery-powered equipment - Automotive electronics

Detailed and Complete Alternative Models

  1. S-873377BUP-0AAT2U: Similar specifications, but with higher output current capability.
  2. S-873377CUP-0AAT2U: Enhanced version with additional features like adjustable output voltage.
  3. S-873377DUP-0AAT2U: Lower dropout voltage variant for applications requiring minimal voltage drop.

These alternative models provide flexibility in choosing the most suitable product based on specific requirements.

Word count: 445 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-873377AUP-0AAT2U en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S-873377AUP-0AAT2U in technical solutions:

  1. Q: What is S-873377AUP-0AAT2U? A: S-873377AUP-0AAT2U is a specific component or device used in technical solutions, typically in electronic circuits.

  2. Q: What is the purpose of S-873377AUP-0AAT2U? A: The purpose of S-873377AUP-0AAT2U is to perform a specific function within a technical solution, such as voltage regulation or signal amplification.

  3. Q: How does S-873377AUP-0AAT2U work? A: S-873377AUP-0AAT2U works by receiving input signals or power and processing them according to its design specifications to produce the desired output.

  4. Q: What are the key features of S-873377AUP-0AAT2U? A: The key features of S-873377AUP-0AAT2U may include voltage range, current capacity, operating temperature, package type, and other specifications relevant to its application.

  5. Q: In which technical solutions can S-873377AUP-0AAT2U be used? A: S-873377AUP-0AAT2U can be used in various technical solutions, including but not limited to power supplies, audio amplifiers, motor control systems, and communication devices.

  6. Q: What are the advantages of using S-873377AUP-0AAT2U in technical solutions? A: Some advantages of using S-873377AUP-0AAT2U may include its reliability, efficiency, compact size, ease of integration, and compatibility with other components.

  7. Q: Are there any limitations or considerations when using S-873377AUP-0AAT2U? A: Yes, it is important to consider factors such as voltage and current requirements, thermal management, compatibility with other components, and any specific application constraints.

  8. Q: Can S-873377AUP-0AAT2U be used in high-temperature environments? A: The operating temperature range of S-873377AUP-0AAT2U should be checked against the requirements of the specific technical solution to ensure its suitability for high-temperature environments.

  9. Q: Is S-873377AUP-0AAT2U compatible with other commonly used electronic components? A: S-873377AUP-0AAT2U is designed to be compatible with standard electronic interfaces and can typically be integrated with other commonly used components in technical solutions.

  10. Q: Where can I find more information about the application of S-873377AUP-0AAT2U? A: More detailed information about the application of S-873377AUP-0AAT2U can be found in its datasheet, technical documentation, or by contacting the manufacturer or supplier directly.