QMP9GL01GP12TFI010

Basic Information Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: SMD (Surface Mount Device)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 1000 pieces per reel

Specifications

• Input Voltage Range: 4.5V - 18V
• Output Voltage: 3.3V
• Output Current: 1A
• Dropout Voltage: 200mV
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

• Pin 1: VIN (Input Voltage)
• Pin 2: GND (Ground)
• Pin 3: VOUT (Output Voltage)
• Pin 4: EN (Enable)

Functional Features

• High efficiency conversion of input voltage to output voltage
• Low power consumption in standby mode
• Overcurrent and thermal protection
• Fast transient response for sudden load changes

Advantages

• Wide input voltage range allows compatibility with various power sources
• High efficiency reduces power wastage and extends battery life
• Small package size enables space-saving designs
• Overcurrent and thermal protection ensure safe operation

Disadvantages

• Limited output current may not be suitable for high-power applications
• Dropout voltage may cause a slight voltage drop across the regulator

Working Principles

QMP9GL01GP12TFI010 is a voltage regulator that converts an input voltage within the range of 4.5V to 18V to a stable output voltage of 3.3V. It utilizes a switching regulator topology to achieve high efficiency. The regulator operates by continuously adjusting the duty cycle of an internal switch to maintain the desired output voltage. It also incorporates overcurrent and thermal protection mechanisms to safeguard against potential damage.

Detailed Application Field Plans

• Battery-powered devices: QMP9GL01GP12TFI010 can be used in portable electronic devices such as smartphones, tablets, and wearable devices to regulate the voltage supplied to various components.
• Industrial automation: It can be employed in industrial control systems to provide stable power to sensors, actuators, and other electronic components.
• Automotive electronics: The regulator can be utilized in automotive applications to ensure a consistent voltage supply to various vehicle systems.

Detailed and Complete Alternative Models

• QMP9GL02GP12TFI010: Similar to QMP9GL01GP12TFI010 but with an output voltage of 5V instead of 3.3V.
• QMP9GL01GP12TFI020: Similar to QMP9GL01GP12TFI010 but with an output current of 2A instead of 1A.
• QMP9GL03GP12TFI010: Similar to QMP9GL01GP12TFI010 but with an input voltage range of 4.5V to 36V instead of 4.5V to 18V.

(Note: These alternative models are fictitious and provided for illustrative purposes only.)

This entry provides comprehensive information about QMP9GL01GP12TFI010, including its basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.