Consulte las especificaciones para obtener detalles del producto.
AZ1117S-5.0TRE1
Product Overview
Category
AZ1117S-5.0TRE1 belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Voltage regulation
- Stabilization of output voltage
- Low dropout voltage
- High current capability
Package
AZ1117S-5.0TRE1 is available in a TO-252 package.
Essence
The essence of AZ1117S-5.0TRE1 lies in its ability to provide a stable and regulated output voltage for various electronic applications.
Packaging/Quantity
It is typically packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Input Voltage Range: 4.75V to 18V
- Output Voltage: 5.0V
- Dropout Voltage: 1.2V (typical)
- Maximum Output Current: 1A
- Line Regulation: ±0.2% (typical)
- Load Regulation: ±0.4% (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
AZ1117S-5.0TRE1 has three pins:
- Vin (Input): This pin is used to connect the input voltage source.
- Vout (Output): The regulated output voltage is obtained from this pin.
- GND (Ground): It is connected to the ground reference of the circuit.
Functional Features
- Voltage Regulation: AZ1117S-5.0TRE1 ensures a stable output voltage of 5.0V regardless of input voltage fluctuations.
- Low Dropout Voltage: With a low dropout voltage of 1.2V, it can operate efficiently even when the input voltage is close to the desired output voltage.
- High Current Capability: It can provide a maximum output current of 1A, making it suitable for various electronic devices.
Advantages and Disadvantages
Advantages
- Reliable voltage regulation
- Low dropout voltage ensures efficient operation
- High current capability for versatile applications
- Wide operating temperature range
Disadvantages
- Limited output current compared to higher-rated voltage regulators
- Requires external capacitors for stability in some applications
Working Principles
AZ1117S-5.0TRE1 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
AZ1117S-5.0TRE1 finds applications in various electronic systems, including but not limited to: - Power supplies - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to AZ1117S-5.0TRE1 include: - LM317 - LT1084 - LM7805 - NCP1117
These alternatives may have different specifications and package options, so it is important to select the one that best suits the specific application requirements.
Word count: 338 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AZ1117S-5.0TRE1 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of AZ1117S-5.0TRE1 in technical solutions:
Q1: What is AZ1117S-5.0TRE1? A1: AZ1117S-5.0TRE1 is a low dropout voltage regulator (LDO) that provides a fixed output voltage of 5.0V.
Q2: What is the input voltage range for AZ1117S-5.0TRE1? A2: The input voltage range for AZ1117S-5.0TRE1 is typically between 6.0V and 15.0V.
Q3: What is the maximum output current of AZ1117S-5.0TRE1? A3: The maximum output current of AZ1117S-5.0TRE1 is 1.0A.
Q4: Can AZ1117S-5.0TRE1 handle higher input voltages than 15.0V? A4: No, AZ1117S-5.0TRE1 is not designed to handle input voltages higher than 15.0V. It may cause damage to the device.
Q5: Is AZ1117S-5.0TRE1 suitable for battery-powered applications? A5: Yes, AZ1117S-5.0TRE1 is suitable for battery-powered applications as it has a low dropout voltage and low quiescent current.
Q6: Does AZ1117S-5.0TRE1 require any external components for operation? A6: Yes, AZ1117S-5.0TRE1 requires an input capacitor and an output capacitor for stable operation. Refer to the datasheet for recommended values.
Q7: Can AZ1117S-5.0TRE1 be used in automotive applications? A7: Yes, AZ1117S-5.0TRE1 is suitable for automotive applications as it meets the AEC-Q100 standard and has a wide operating temperature range.
Q8: What is the dropout voltage of AZ1117S-5.0TRE1? A8: The dropout voltage of AZ1117S-5.0TRE1 is typically 1.2V at 1.0A load current.
Q9: Is AZ1117S-5.0TRE1 short-circuit protected? A9: Yes, AZ1117S-5.0TRE1 has built-in short-circuit protection to prevent damage in case of a short circuit on the output.
Q10: Can AZ1117S-5.0TRE1 be used in high-temperature environments? A10: Yes, AZ1117S-5.0TRE1 can operate in high-temperature environments as it has a maximum junction temperature of 125°C. However, proper heat sinking may be required.
Please note that these answers are general and it's always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.