Diodes Incorporated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MMSZ5231BS-7
Ver Detalle Hojas de datos

MMSZ5231BS-7

Introduction

The MMSZ5231BS-7 is a semiconductor product belonging to the category of Zener diodes. This component is widely used in electronic circuits for voltage regulation and protection against voltage spikes. The MMSZ5231BS-7 possesses specific characteristics, packaging, and quantity that make it suitable for various applications in the electronics industry.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection
  • Characteristics: Precise voltage regulation, low leakage current, small form factor
  • Package: SOD-323
  • Essence: Semiconductor device for voltage regulation
  • Packaging/Quantity: Available in reels with varying quantities

Specifications

  • Voltage - Zener (Nom) (Vz): 4.7V
  • Power - Max: 350mW
  • Impedance (Max) (Zzt): 20 Ohm
  • Current - Reverse Leakage @ Vr: 100nA
  • Voltage - Forward (Vf) (Max) @ If: 900mV @ 10mA
  • Operating Temperature: -65°C ~ 150°C

Detailed Pin Configuration

The MMSZ5231BS-7 Zener diode has a standard SOD-323 package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Precise voltage regulation
  • Low reverse leakage current
  • Small form factor for space-constrained designs
  • Fast response time to voltage spikes

Advantages and Disadvantages

Advantages

  • Provides precise voltage regulation
  • Offers protection against voltage spikes
  • Small form factor allows for compact circuit designs

Disadvantages

  • Limited power dissipation capability
  • Susceptible to damage from excessive current or voltage

Working Principles

The MMSZ5231BS-7 operates based on the principle of the Zener effect, where it maintains a constant voltage across its terminals when reverse-biased. This allows it to regulate the voltage in a circuit and protect sensitive components from voltage fluctuations.

Detailed Application Field Plans

The MMSZ5231BS-7 finds extensive application in various electronic circuits, including: - Voltage regulators in power supplies - Overvoltage protection in communication equipment - Signal clamping in audio and video systems - Voltage reference in precision measurement instruments

Detailed and Complete Alternative Models

  • BZX84C4V7: 4.7V Zener diode in SOT-23 package
  • MMBZ5231B: 4.7V Zener diode in SOT-23 package
  • 1N4732A: 4.7V Zener diode in DO-41 package

In conclusion, the MMSZ5231BS-7 Zener diode offers precise voltage regulation and protection features, making it an essential component in various electronic circuits.

[Word Count: 398]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MMSZ5231BS-7 en soluciones técnicas

  1. What is the MMSZ5231BS-7?

    • The MMSZ5231BS-7 is a surface mount zener diode designed for voltage regulation and protection in various electronic circuits.

  2. What is the voltage rating of the MMSZ5231BS-7?

    • The MMSZ5231BS-7 has a nominal zener voltage of 5.1V, making it suitable for applications requiring precise voltage regulation.

  3. What are the typical applications of the MMSZ5231BS-7?

    • The MMSZ5231BS-7 is commonly used in voltage reference circuits, voltage clamping, and transient voltage suppression in electronic equipment.

  4. What is the power dissipation of the MMSZ5231BS-7?

    • The MMSZ5231BS-7 has a power dissipation of 500mW, allowing it to handle moderate power levels in circuit protection applications.

  5. What is the maximum forward voltage of the MMSZ5231BS-7?

    • The maximum forward voltage of the MMSZ5231BS-7 is typically 1V at a forward current of 200mA.

  6. Can the MMSZ5231BS-7 be used for overvoltage protection?

    • Yes, the MMSZ5231BS-7 can be used to protect sensitive components from overvoltage conditions by shunting excess voltage to ground.

  7. What is the temperature coefficient of the MMSZ5231BS-7?

    • The temperature coefficient of the MMSZ5231BS-7 is typically 0.05%/°C, ensuring stable performance over a wide temperature range.

  8. Is the MMSZ5231BS-7 RoHS compliant?

    • Yes, the MMSZ5231BS-7 is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it suitable for use in environmentally conscious designs.

  9. What is the package type of the MMSZ5231BS-7?

    • The MMSZ5231BS-7 is available in a small SOD-123 surface mount package, which is suitable for compact circuit layouts.

  10. Are there any application notes or reference designs available for the MMSZ5231BS-7?

    • Yes, manufacturers often provide application notes and reference designs for the MMSZ5231BS-7, offering guidance on its proper use in technical solutions.