Diodes Incorporated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
UDZ3V6B-7
Ver Detalle Hojas de datos

UDZ3V6B-7

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Low voltage drop, high precision
Package: SOD-323
Essence: Zener Diode
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage: 6.2V
  • Power Dissipation: 200mW
  • Operating Temperature: -55°C to +150°C
  • Zener Impedance: 40Ω
  • Max Reverse Leakage Current: 100nA

Detailed Pin Configuration

The UDZ3V6B-7 has a standard SOD-323 package with two pins. The anode is connected to pin 1 and the cathode to pin 2.

Functional Features

  • Precise voltage regulation
  • Low voltage drop
  • High reliability

Advantages

  • Small form factor
  • Wide operating temperature range
  • Low reverse leakage current

Disadvantages

  • Limited power dissipation
  • Sensitive to voltage spikes

Working Principles

The UDZ3V6B-7 operates as a Zener diode, maintaining a constant voltage across its terminals when reverse-biased. It achieves this by allowing current to flow in the reverse direction when the voltage reaches the specified value.

Detailed Application Field Plans

The UDZ3V6B-7 is commonly used in low-power applications requiring precise voltage regulation, such as battery-powered devices, sensor circuits, and portable electronics.

Detailed and Complete Alternative Models

  • UDZ3V3B-7: 3.3V Zener Diode
  • UDZ3V9B-7: 9V Zener Diode
  • UDZ4V3B-7: 4.3V Zener Diode

This completes the entry for UDZ3V6B-7, providing comprehensive information on its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de UDZ3V6B-7 en soluciones técnicas

  1. What is UDZ3V6B-7?

    • UDZ3V6B-7 is a Zener diode with a voltage of 6.2V and a power dissipation of 200mW.

  2. What are the typical applications of UDZ3V6B-7?

    • UDZ3V6B-7 is commonly used in voltage regulation, overvoltage protection, and signal clamping applications.

  3. What is the maximum current that UDZ3V6B-7 can handle?

    • The maximum current for UDZ3V6B-7 is typically around 5mA.

  4. How does UDZ3V6B-7 provide overvoltage protection?

    • UDZ3V6B-7 acts as a voltage clamp, conducting current when the voltage exceeds its breakdown voltage, thus protecting downstream components.

  5. Can UDZ3V6B-7 be used in reverse bias?

    • Yes, UDZ3V6B-7 can be used in reverse bias conditions for certain applications like voltage reference circuits.

  6. What is the temperature range for UDZ3V6B-7?

    • UDZ3V6B-7 typically operates within a temperature range of -55°C to 150°C.

  7. Is UDZ3V6B-7 suitable for high-frequency applications?

    • Yes, UDZ3V6B-7 is suitable for high-frequency applications due to its fast response time and low capacitance.

  8. Can multiple UDZ3V6B-7 be connected in series or parallel?

    • Multiple UDZ3V6B-7 can be connected in series to increase the breakdown voltage or in parallel to increase the current-handling capacity.

  9. What are the key differences between UDZ3V6B-7 and other Zener diodes?

    • UDZ3V6B-7 stands out due to its specific voltage rating, power dissipation, and breakdown characteristics compared to other Zener diodes.

  10. Are there any precautions to consider when using UDZ3V6B-7 in a circuit?

    • It's important to ensure proper heat dissipation and current limiting to prevent damage to the UDZ3V6B-7, especially during transient events.