5P49V5901B075NLGI8

Basic Information Overview

• Category: Electronic Component
• Use: Clock Generator
• Characteristics: High Precision, Low Power Consumption
• Package: QFN-20
• Essence: Integrated Circuit
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Frequency Range: 1 MHz to 700 MHz
• Output Type: LVCMOS
• Supply Voltage: 1.8 V to 3.3 V
• Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

1. VDD (Power Supply)
2. GND (Ground)
3. OUT0 (Output 0)
4. OUT1 (Output 1)
5. OE (Output Enable)
6. SDA (Serial Data Input/Output)
7. SCL (Serial Clock Input)
8. NC (No Connection)
9. NC (No Connection)
10. NC (No Connection)
11. NC (No Connection)
12. NC (No Connection)
13. NC (No Connection)
14. NC (No Connection)
15. NC (No Connection)
16. NC (No Connection)
17. NC (No Connection)
18. NC (No Connection)
19. NC (No Connection)
20. NC (No Connection)

Functional Characteristics

• Generates clock signals with high precision and low jitter.
• Supports multiple output frequencies.
• Provides programmable output enable/disable feature.
• Offers I2C interface for configuration and control.

Advantages and Disadvantages

Advantages: - High precision clock generation. - Low power consumption. - Flexible output frequency options. - Easy configuration through I2C interface.

Disadvantages: - Limited frequency range compared to some other clock generators. - Requires external components for proper operation.

Applicable Range of Products

• Communication Systems
• Networking Equipment
• Consumer Electronics
• Industrial Automation

Working Principles

The 5P49V5901B075NLGI8 is a clock generator that utilizes an integrated circuit to generate clock signals. It operates by receiving a reference clock input and using internal circuitry to generate multiple output clocks with precise frequencies. The device can be configured and controlled through the I2C interface, allowing for flexibility in output frequency selection and other settings.

Detailed Application Field Plans

1. Communication Systems: The clock generator can be used in communication systems to provide accurate timing for data transmission and reception.
2. Networking Equipment: It can be employed in networking equipment such as routers and switches to synchronize data transfer between devices.
3. Consumer Electronics: The device finds application in consumer electronics like TVs, set-top boxes, and gaming consoles to ensure proper synchronization of audio and video signals.
4. Industrial Automation: It can be utilized in industrial automation systems to synchronize various processes and control devices.

Detailed Alternative Models

• 5P49V5901A075NLGI8
• 5P49V5901C075NLGI8
• 5P49V5901D075NLGI8
• 5P49V5901E075NLGI8

5 Common Technical Questions and Answers

1. Q: What is the maximum frequency output of the 5P49V5901B075NLGI8? A: The maximum frequency output is 700 MHz.

2. Q: Can I disable specific output channels? A: Yes, the device provides an output enable/disable feature that allows you to selectively enable or disable output channels.

3. Q: What is the operating voltage range for this clock generator? A: The operating voltage range is 1.8 V to 3.3 V.

4. Q: Does the device require any external components for operation? A: Yes, external capacitors are required for proper operation.

5. Q: Can I configure the device using a serial interface? A: Yes, the clock generator can be configured and controlled through the I2C interface.

This encyclopedia entry provides an overview of the 5P49V5901B075NLGI8 clock generator, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.