IDT71V416VL15BEGI8

Product Overview

• Category: Integrated Circuit (IC)
• Use: Memory device
• Characteristics: High-speed, low-power, volatile memory
• Package: 44-pin TSOP (Thin Small Outline Package)
• Essence: Random Access Memory (RAM)
• Packaging/Quantity: Tray packaging, quantity varies

Specifications

• Memory Type: Static Random Access Memory (SRAM)
• Density: 4 Megabits (4Mbit)
• Organization: 512K words x 8 bits
• Operating Voltage: 3.3V
• Access Time: 15 nanoseconds (ns)
• Operating Temperature: -40°C to +85°C
• Data Retention: Greater than 10 years
• Package Dimensions: 12.8mm x 20.4mm x 1.0mm

Detailed Pin Configuration

The IDT71V416VL15BEGI8 has a total of 44 pins. The pin configuration is as follows:

1. A0-A18: Address Inputs
2. DQ0-DQ7: Data Inputs/Outputs
3. WE#: Write Enable Input
4. OE#: Output Enable Input
5. CE#: Chip Enable Input
6. VCC: Power Supply
7. GND: Ground

(Note: The remaining pins are not listed for brevity.)

Functional Features

• High-speed operation allows for fast data access.
• Low-power consumption makes it suitable for battery-powered devices.
• Volatile memory retains data only when powered, allowing for quick read/write operations.
• Easy integration into various electronic systems due to standard interface and pin compatibility.

Advantages

• Fast access time improves overall system performance.
• Low power consumption extends battery life in portable devices.
• High-density memory allows for storing large amounts of data.
• Compatibility with standard interfaces simplifies integration into existing systems.

Disadvantages

• Volatile nature requires constant power supply to retain data.
• Limited storage capacity compared to non-volatile memory options.
• Relatively higher cost per bit compared to other memory technologies.

Working Principles

The IDT71V416VL15BEGI8 is a static random access memory (SRAM) device. It stores data using flip-flop circuits, which retain information as long as power is supplied. When an address is provided, the corresponding data can be read or written to the memory cells. The chip enable (CE#), write enable (WE#), and output enable (OE#) signals control the memory operations.

Detailed Application Field Plans

The IDT71V416VL15BEGI8 is commonly used in various electronic systems that require high-speed and low-power memory. Some specific application fields include:

1. Computer Systems: Used as cache memory or for temporary storage in CPUs.
2. Networking Equipment: Utilized for packet buffering and data storage in routers and switches.
3. Telecommunications: Employed in base stations, network switches, and voice/data communication systems.
4. Industrial Control Systems: Used for data buffering and real-time processing in automation and control applications.
5. Consumer Electronics: Integrated into gaming consoles, set-top boxes, and multimedia devices for data storage and processing.

Detailed and Complete Alternative Models

1. IDT71V416S: Similar specifications but with a different package (SOJ - Small Outline J-lead).
2. IDT71V416YL: Higher density version with 8 Megabits (8Mbit) capacity.
3. IDT71V416L: Lower power variant with reduced operating voltage (2.5V).

(Note: The list of alternative models can be expanded based on specific requirements and availability in the market.)

This concludes the encyclopedia entry for the IDT71V416VL15BEGI8, providing an overview of its product details, specifications, features, advantages, disadvantages, working principles, application fields, and alternative models.