Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL6414IRZ
Ver Detalle Hojas de datos

ISL6414IRZ

Product Overview

Category

ISL6414IRZ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL6414IRZ comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6414IRZ lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

ISL6414IRZ is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 4A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL6414IRZ has a total of 16 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. SS: Soft-start pin
  7. PGND: Power ground pin
  8. VCC: Supply voltage pin
  9. BOOT: Bootstrap pin
  10. LX: Switching node pin
  11. AGND: Analog ground pin
  12. OCSET: Overcurrent protection pin
  13. PGOOD: Power good indicator pin
  14. VSENSE: Voltage sense pin
  15. ISENSE: Current sense pin
  16. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range for compatibility with various power sources
  • High efficiency operation to minimize power loss
  • Overcurrent protection for enhanced safety
  • Power good indicator for monitoring the output voltage status
  • Soft-start feature to prevent inrush current

Advantages and Disadvantages

Advantages

  • High efficiency operation results in reduced power consumption
  • Compact size allows for easy integration into space-constrained designs
  • Wide input voltage range provides flexibility in power source selection
  • Overcurrent protection enhances device safety

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Requires external components for proper operation, increasing overall system complexity

Working Principles

ISL6414IRZ operates based on a buck converter topology. It takes an input voltage from the VIN pin, converts it to the desired output voltage, and delivers it through the VOUT pin. The feedback mechanism, controlled by the FB pin, ensures that the output voltage remains within the specified range. The COMP pin is used for compensation purposes to stabilize the control loop. The EN pin enables or disables the device, while the SS pin controls the soft-start feature.

Detailed Application Field Plans

ISL6414IRZ finds application in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial automation - Telecommunications equipment - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL6414IRZ are: - LM2596S-ADJ - TPS54331 - LT8610AB

These models can be considered as alternatives depending on specific requirements and design constraints.

Word count: 511 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL6414IRZ en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ISL6414IRZ in technical solutions:

  1. Q: What is ISL6414IRZ? A: ISL6414IRZ is a high-performance dual synchronous buck controller designed for use in various power supply applications.

  2. Q: What is the input voltage range supported by ISL6414IRZ? A: The input voltage range supported by ISL6414IRZ is typically between 4.5V and 24V.

  3. Q: What is the output voltage range that can be achieved using ISL6414IRZ? A: The output voltage range that can be achieved using ISL6414IRZ is typically between 0.6V and 5.5V.

  4. Q: Can ISL6414IRZ support multiple outputs? A: Yes, ISL6414IRZ can support multiple outputs by configuring it in a multi-phase operation.

  5. Q: What is the maximum switching frequency of ISL6414IRZ? A: The maximum switching frequency of ISL6414IRZ is typically 1MHz.

  6. Q: Does ISL6414IRZ have any built-in protection features? A: Yes, ISL6414IRZ has built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  7. Q: Can ISL6414IRZ operate in a wide temperature range? A: Yes, ISL6414IRZ can operate in a wide temperature range, typically from -40°C to +85°C.

  8. Q: Is ISL6414IRZ suitable for battery-powered applications? A: Yes, ISL6414IRZ is suitable for battery-powered applications as it has a low quiescent current and supports low-voltage operation.

  9. Q: What type of control loop does ISL6414IRZ use? A: ISL6414IRZ uses a voltage mode control loop for regulating the output voltage.

  10. Q: Can ISL6414IRZ be used in high-current applications? A: Yes, ISL6414IRZ can be used in high-current applications by configuring it in a multi-phase operation to share the load current.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.