Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL6525CB
Ver Detalle Hojas de datos

ISL6525CB

Product Overview

Category

ISL6525CB belongs to the category of integrated circuits (ICs).

Use

The ISL6525CB is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • Voltage regulation capability
  • High efficiency
  • Compact size
  • Low power consumption

Package

ISL6525CB is available in a small outline package (SOP) format.

Essence

The essence of ISL6525CB lies in its ability to regulate and stabilize voltage levels within electronic devices.

Packaging/Quantity

ISL6525CB is typically packaged in reels or tubes, with quantities varying depending on the supplier.

Specifications

  • Input Voltage Range: 4.5V to 25V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL6525CB has a total of 16 pins, each serving a specific function. The pin configuration is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback voltage
  4. COMP: Compensation node
  5. SS/TR: Soft-start/Tracking control
  6. VCC: Power supply for internal circuitry
  7. PGND: Power ground
  8. BOOT: Bootstrap capacitor connection
  9. LX: Switching node
  10. LX: Switching node
  11. LX: Switching node
  12. LX: Switching node
  13. EN: Enable control
  14. PGOOD: Power good indicator
  15. VREF: Reference voltage
  16. VCC: Power supply for internal circuitry

Functional Features

  • Voltage regulation: The ISL6525CB ensures stable output voltage levels.
  • Soft-start: Provides a controlled startup to prevent voltage spikes.
  • Power good indicator: Indicates when the output voltage is within the desired range.
  • Enable control: Allows for easy on/off control of the voltage regulator.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Compact size allows for integration into various electronic devices.
  • Wide input and output voltage ranges provide flexibility in application.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Temperature range limitations restrict usage in extreme environments.

Working Principles

The ISL6525CB operates based on a pulse-width modulation (PWM) technique. It regulates the output voltage by adjusting the duty cycle of the switching transistor. This ensures that the desired voltage level is maintained, even with varying input conditions.

Detailed Application Field Plans

The ISL6525CB finds applications in various fields, including but not limited to: - Consumer electronics - Telecommunications - Industrial equipment - Automotive systems

Alternative Models

For those seeking alternatives to the ISL6525CB, the following models can be considered: - LM2576 - LT1083 - TPS5430

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, the ISL6525CB is an integrated circuit commonly used as a voltage regulator in electronic devices. Its compact size, high efficiency, and voltage regulation capabilities make it a popular choice in various industries. However, its limited maximum output current and temperature range restrictions should be taken into consideration during application design.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL6525CB en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ISL6525CB in technical solutions:

  1. Q: What is ISL6525CB? A: ISL6525CB is a highly integrated dual-output PWM controller designed for use in various power supply applications.

  2. Q: What are the main features of ISL6525CB? A: The main features of ISL6525CB include dual synchronous buck controllers, adjustable switching frequency, programmable soft-start, and overcurrent protection.

  3. Q: What is the input voltage range supported by ISL6525CB? A: ISL6525CB supports an input voltage range of 4.5V to 5.5V.

  4. Q: How many outputs can ISL6525CB provide? A: ISL6525CB provides two independent outputs, each capable of delivering up to 3A of current.

  5. Q: Can ISL6525CB operate in a synchronous rectification mode? A: Yes, ISL6525CB can operate in both synchronous and non-synchronous rectification modes.

  6. Q: Is ISL6525CB suitable for battery-powered applications? A: Yes, ISL6525CB is suitable for battery-powered applications as it offers low quiescent current and high efficiency operation.

  7. Q: Does ISL6525CB have any built-in protection features? A: Yes, ISL6525CB includes features like overvoltage protection, undervoltage lockout, and thermal shutdown to ensure safe operation.

  8. Q: Can ISL6525CB be used in automotive applications? A: Yes, ISL6525CB is qualified for automotive applications and meets the necessary standards for automotive electronics.

  9. Q: What is the maximum switching frequency supported by ISL6525CB? A: The maximum switching frequency supported by ISL6525CB is 1MHz.

  10. Q: Are there any evaluation boards or reference designs available for ISL6525CB? A: Yes, Intersil provides evaluation boards and reference designs for ISL6525CB to help with the development and implementation of power supply solutions.

Please note that these answers are general and may vary depending on specific application requirements.