Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL9003AIEMZ-T
Ver Detalle Hojas de datos

ISL9003AIEMZ-T

Product Overview

Category

ISL9003AIEMZ-T belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL9003AIEMZ-T comes in a small surface-mount package.

Essence

The essence of ISL9003AIEMZ-T lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

This product is typically packaged in reels and is available in large quantities.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 300mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 25µA (typical)

Detailed Pin Configuration

ISL9003AIEMZ-T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Low quiescent current consumption
  • Fast transient response
  • Short-circuit and overcurrent protection
  • Thermal shutdown protection
  • Adjustable output voltage through external resistors

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power dissipation
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility
  • Overcurrent and thermal protection ensure device safety

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

ISL9003AIEMZ-T operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a stable output voltage regardless of variations in the input voltage or load conditions. The internal circuitry adjusts the pass transistor to regulate the output voltage within the specified range.

Detailed Application Field Plans

ISL9003AIEMZ-T finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL9003AIEMZ-T are: - LM317 - LT1086 - TPS7A4700 - MCP1702

These models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 275 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL9003AIEMZ-T en soluciones técnicas

  1. What is the typical input voltage range for ISL9003AIEMZ-T?
    - The typical input voltage range for ISL9003AIEMZ-T is 2.5V to 5.5V.

  2. What is the maximum output current of ISL9003AIEMZ-T?
    - The maximum output current of ISL9003AIEMZ-T is 300mA.

  3. Can ISL9003AIEMZ-T be used in battery-powered applications?
    - Yes, ISL9003AIEMZ-T is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  4. Does ISL9003AIEMZ-T have built-in overcurrent protection?
    - Yes, ISL9003AIEMZ-T features built-in overcurrent protection to safeguard the load and the IC itself.

  5. What is the typical dropout voltage of ISL9003AIEMZ-T?
    - The typical dropout voltage of ISL9003AIEMZ-T is 200mV at 100mA load.

  6. Is ISL9003AIEMZ-T suitable for space-constrained designs?
    - Yes, ISL9003AIEMZ-T comes in a small package and is suitable for space-constrained designs.

  7. Can ISL9003AIEMZ-T operate in ambient temperatures outside the standard range?
    - ISL9003AIEMZ-T has an extended temperature range from -40°C to 125°C, making it suitable for a variety of environments.

  8. Does ISL9003AIEMZ-T require external compensation components?
    - No, ISL9003AIEMZ-T is internally compensated, reducing the need for external components.

  9. Can ISL9003AIEMZ-T be used in automotive applications?
    - Yes, ISL9003AIEMZ-T is AEC-Q100 qualified and suitable for automotive applications.

  10. What are the key advantages of using ISL9003AIEMZ-T in technical solutions?
    - The key advantages of ISL9003AIEMZ-T include its wide input voltage range, low quiescent current, small package size, and built-in protection features.