LT3065HDD-2.5#PBF

Product Overview

Category

The LT3065HDD-2.5#PBF belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

The LT3065HDD-2.5#PBF exhibits the following characteristics: - High precision voltage regulation - Low dropout voltage - Low output noise - Wide input voltage range - Current limit and thermal shutdown protection

Package

The LT3065HDD-2.5#PBF comes in a standard TO-252 package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

Each package of LT3065HDD-2.5#PBF contains one unit of the voltage regulator.

Specifications

The specifications of LT3065HDD-2.5#PBF are as follows:

• Input Voltage Range: 1.8V to 45V
• Output Voltage: 2.5V
• Dropout Voltage: 300mV
• Output Current: Up to 500mA
• Line Regulation: ±0.02%
• Load Regulation: ±0.1%
• Output Noise: 30µVRMS (10Hz to 100kHz)
• Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT3065HDD-2.5#PBF has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin

Functional Features

The LT3065HDD-2.5#PBF offers the following functional features:

• High precision voltage regulation ensures accurate output voltage.
• Low dropout voltage allows the regulator to operate efficiently even with low input-output voltage differentials.
• Low output noise ensures minimal interference in sensitive electronic circuits.
• Wide input voltage range enables compatibility with various power sources.
• Current limit and thermal shutdown protection safeguard the regulator and connected components from damage.

Advantages and Disadvantages

Advantages

• High precision voltage regulation for accurate output.
• Low dropout voltage for efficient operation.
• Low output noise for minimal interference.
• Wide input voltage range for versatility.
• Current limit and thermal shutdown protection for component safety.

Disadvantages

• Limited output current capacity (up to 500mA).
• Relatively higher cost compared to some other voltage regulators.

Working Principles

The LT3065HDD-2.5#PBF operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in input voltage or load conditions. This is achieved through the use of precision components and feedback loops within the regulator.

Detailed Application Field Plans

The LT3065HDD-2.5#PBF finds applications in various fields, including but not limited to: 1. Industrial automation systems 2. Automotive electronics 3. Telecommunications equipment 4. Portable electronic devices 5. Medical instruments

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to LT3065HDD-2.5#PBF include: 1. LM317T 2. ADP3339AKCZ-2.5-R7 3. MAX603CPA 4. TPS7A4700RGWT 5. LT1963AEST-2.5#PBF

These alternatives can be considered based on specific requirements and design constraints.

In conclusion, the LT3065HDD-2.5#PBF is a voltage regulator with high precision, low dropout voltage, and low output noise. It offers a wide input voltage range and provides current limit and thermal shutdown protection. While it has limitations in terms of output current capacity and cost, it finds applications in various fields such as industrial automation, automotive electronics, telecommunications, portable devices, and medical instruments. Alternative models like LM317T, ADP3339AKCZ-2.5-R7, MAX603CPA, TPS7A4700RGWT, and LT1963AEST-2.5#PBF can be considered as well.