The LT3065MPDD-1.2#TRPBF belongs to the category of voltage regulators.
This product is primarily used for regulating voltage in electronic circuits.
The LT3065MPDD-1.2#TRPBF comes in a small package, suitable for surface mount applications.
The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.
The LT3065MPDD-1.2#TRPBF is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The LT3065MPDD-1.2#TRPBF has the following pin configuration:
The LT3065MPDD-1.2#TRPBF operates by regulating the input voltage to a stable 1.2V output voltage. It achieves this through a combination of internal circuitry and feedback control mechanisms.
The LT3065MPDD-1.2#TRPBF finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable electronics - Industrial control systems - Automotive electronics - Communication equipment
Some alternative models that offer similar functionality to the LT3065MPDD-1.2#TRPBF include: - LM317 - LT1084 - ADP3339
These models can be considered as alternatives based on specific requirements and design constraints.
In conclusion, the LT3065MPDD-1.2#TRPBF is a voltage regulator with excellent characteristics such as high efficiency, low dropout voltage, and thermal shutdown protection. It finds applications in various electronic devices and has alternative models available for different design needs.
What is the input voltage range for LT3065MPDD-1.2#TRPBF?
- The input voltage range for LT3065MPDD-1.2#TRPBF is 1.8V to 45V.
What is the output voltage of LT3065MPDD-1.2#TRPBF?
- The output voltage of LT3065MPDD-1.2#TRPBF is fixed at 1.2V.
What is the maximum output current of LT3065MPDD-1.2#TRPBF?
- The maximum output current of LT3065MPDD-1.2#TRPBF is 200mA.
Can LT3065MPDD-1.2#TRPBF be used in battery-powered applications?
- Yes, LT3065MPDD-1.2#TRPBF is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.
Is LT3065MPDD-1.2#TRPBF suitable for automotive applications?
- Yes, LT3065MPDD-1.2#TRPBF is designed to operate in automotive environments, making it suitable for automotive applications.
Does LT3065MPDD-1.2#TRPBF require external capacitors for stability?
- Yes, LT3065MPDD-1.2#TRPBF requires an input and output capacitor for stability.
Can LT3065MPDD-1.2#TRPBF tolerate input voltage transients?
- Yes, LT3065MPDD-1.2#TRPBF can tolerate input voltage transients up to 60V.
What is the typical dropout voltage of LT3065MPDD-1.2#TRPBF?
- The typical dropout voltage of LT3065MPDD-1.2#TRPBF is 300mV at full load.
Is LT3065MPDD-1.2#TRPBF suitable for noise-sensitive applications?
- Yes, LT3065MPDD-1.2#TRPBF features low output noise, making it suitable for noise-sensitive applications.
Can LT3065MPDD-1.2#TRPBF be used in industrial control systems?
- Yes, LT3065MPDD-1.2#TRPBF is well-suited for use in industrial control systems due to its wide input voltage range and robust design.