Linear Technology/Analog Devices
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LT8610ABIMSE-3.3#PBF
Ver Detalle Hojas de datos

LT8610ABIMSE-3.3#PBF

Product Overview

Category

The LT8610ABIMSE-3.3#PBF belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators category.

Use

This product is primarily used as a step-down switching regulator, providing efficient power conversion from a higher input voltage to a lower output voltage.

Characteristics

  • High efficiency: The LT8610ABIMSE-3.3#PBF offers high efficiency over a wide range of input and output voltages.
  • Wide input voltage range: It can handle input voltages ranging from 3.4V to 42V, making it suitable for various applications.
  • Adjustable output voltage: The output voltage can be adjusted from 0.8V to 18V, allowing flexibility in different system requirements.
  • Low quiescent current: It has a low quiescent current of only a few microamps, enabling power savings during standby or light load conditions.

Package

The LT8610ABIMSE-3.3#PBF comes in a small MSOP-16 package, which provides compactness and ease of integration into electronic systems.

Essence

The essence of the LT8610ABIMSE-3.3#PBF lies in its ability to efficiently regulate voltage levels, ensuring stable and reliable power supply for various electronic devices.

Packaging/Quantity

This product is typically available in tape and reel packaging, with a quantity of 250 units per reel.

Specifications

  • Input Voltage Range: 3.4V - 42V
  • Output Voltage Range: 0.8V - 18V
  • Maximum Output Current: 2.5A
  • Switching Frequency: Up to 2MHz
  • Quiescent Current: <10µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT8610ABIMSE-3.3#PBF has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. SW: Switching node pin
  4. FB: Feedback pin for output voltage regulation
  5. SYNC/SS: Synchronization or soft-start pin
  6. VCC: Supply voltage pin for internal control circuitry
  7. PGND: Power ground pin
  8. NC: No connection pin
  9. COMP: Compensation pin for loop stability
  10. SS/TR: Soft-start or tracking pin
  11. VOUT: Output voltage pin
  12. VFB: Voltage feedback pin
  13. RT: Timing resistor pin for switching frequency adjustment
  14. CT: Timing capacitor pin for switching frequency adjustment
  15. BST: Bootstrap pin for high-side MOSFET driver
  16. NC: No connection pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High efficiency ensures minimal power loss during voltage conversion.
  • Adjustable output voltage provides flexibility for different system requirements.
  • Low quiescent current enables power savings during standby or light load conditions.
  • Synchronization and soft-start features enhance system stability during startup.

Advantages and Disadvantages

Advantages

  • High efficiency over a wide range of input and output voltages.
  • Compact MSOP-16 package for easy integration.
  • Adjustable output voltage for flexibility.
  • Low quiescent current for power savings.

Disadvantages

  • Limited maximum output current of 2.5A.
  • Requires external timing components for switching frequency adjustment.

Working Principles

The LT8610ABIMSE-3.3#PBF operates as a step-down switching regulator using a synchronous buck topology. It utilizes high-frequency switching to efficiently convert the input voltage to the desired lower output voltage. The internal control circuitry ensures stable and regulated output voltage by adjusting the duty cycle of the switching signal.

Detailed Application Field Plans

The LT8610ABIMSE-3.3#PBF finds applications in various fields, including:

  1. Industrial automation: Powering control systems, motor drives, and sensors.
  2. Automotive electronics: Providing power for infotainment systems, lighting, and advanced driver-assistance systems (ADAS).
  3. Telecommunications: Powering network equipment, base stations, and communication devices.
  4. Consumer electronics: Powering portable devices, home appliances, and audio/video equipment.
  5. Renewable energy: Regulating power in solar energy systems and wind turbines.

Detailed and Complete Alternative Models

  1. LT8610AEMSE-3.3#PBF: Similar to LT8610ABIMSE-3.3#PBF but comes in an MSOP-12 package.
  2. LT8610BIMSE-3.3#PBF: Offers similar functionality but with a different pin configuration in

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LT8610ABIMSE-3.3#PBF en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LT8610ABIMSE-3.3#PBF in technical solutions:

  1. Q: What is the input voltage range for LT8610ABIMSE-3.3#PBF? A: The input voltage range for LT8610ABIMSE-3.3#PBF is from 3.4V to 42V.

  2. Q: What is the output voltage of LT8610ABIMSE-3.3#PBF? A: The output voltage of LT8610ABIMSE-3.3#PBF is fixed at 3.3V.

  3. Q: What is the maximum output current of LT8610ABIMSE-3.3#PBF? A: The maximum output current of LT8610ABIMSE-3.3#PBF is 2.5A.

  4. Q: Can LT8610ABIMSE-3.3#PBF be used in automotive applications? A: Yes, LT8610ABIMSE-3.3#PBF is suitable for automotive applications as it can handle a wide input voltage range.

  5. Q: Does LT8610ABIMSE-3.3#PBF have built-in protection features? A: Yes, LT8610ABIMSE-3.3#PBF includes various protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  6. Q: What is the efficiency of LT8610ABIMSE-3.3#PBF? A: The typical efficiency of LT8610ABIMSE-3.3#PBF is around 95%.

  7. Q: Can LT8610ABIMSE-3.3#PBF be used in battery-powered applications? A: Yes, LT8610ABIMSE-3.3#PBF can be used in battery-powered applications as it supports a wide input voltage range and has low quiescent current.

  8. Q: Is LT8610ABIMSE-3.3#PBF suitable for high-frequency switching applications? A: Yes, LT8610ABIMSE-3.3#PBF is designed for high-frequency operation, making it suitable for such applications.

  9. Q: What is the operating temperature range of LT8610ABIMSE-3.3#PBF? A: The operating temperature range of LT8610ABIMSE-3.3#PBF is from -40°C to 125°C.

  10. Q: Does LT8610ABIMSE-3.3#PBF require any external components for operation? A: Yes, LT8610ABIMSE-3.3#PBF requires a few external components such as input/output capacitors and an inductor for proper operation.

Please note that these answers are based on general information about LT8610ABIMSE-3.3#PBF and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate and detailed information.