Maxim Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
DS232AS-N
Ver Detalle Hojas de datos

DS232AS-N

Product Overview

  • Category: Integrated Circuit
  • Use: Serial Communication
  • Characteristics: High-speed, Low-power consumption
  • Package: DIP (Dual In-line Package)
  • Essence: RS232 Transceiver
  • Packaging/Quantity: Tube packaging, 25 units per tube

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 115.2 kbps
  • Operating Temperature: -40°C to +85°C
  • Interface: RS232
  • Number of Pins: 16

Pin Configuration

| Pin No. | Name | Description | |---------|------|-------------| | 1 | VCC | Power Supply | | 2 | GND | Ground | | 3 | TX | Transmit Data | | 4 | RX | Receive Data | | 5 | RTS | Request to Send | | 6 | CTS | Clear to Send | | 7 | DTR | Data Terminal Ready | | 8 | DSR | Data Set Ready | | 9 | RI | Ring Indicator | | 10 | CD | Carrier Detect | | 11 | NC | Not Connected | | 12 | NC | Not Connected | | 13 | NC | Not Connected | | 14 | NC | Not Connected | | 15 | NC | Not Connected | | 16 | NC | Not Connected |

Functional Features

  • Full-duplex communication
  • Automatic baud rate detection
  • Built-in ESD protection
  • Supports hardware flow control (RTS/CTS)
  • Low power consumption in standby mode

Advantages and Disadvantages

Advantages

  • High-speed data transfer
  • Wide operating temperature range
  • Robust ESD protection
  • Compact DIP package for easy integration

Disadvantages

  • Limited number of available pins
  • Requires external components for voltage level conversion

Working Principles

The DS232AS-N is an RS232 transceiver that enables serial communication between devices. It converts the logic level signals from the transmitting device to RS232 voltage levels suitable for long-distance transmission. The transceiver also converts the RS232 voltage levels received from the communication line back to logic level signals for the receiving device.

Detailed Application Field Plans

The DS232AS-N is commonly used in various applications, including:

  1. Industrial automation systems
  2. Telecommunication equipment
  3. Data acquisition systems
  4. Embedded systems
  5. Networking devices

Alternative Models

Here are some alternative models that can be considered as alternatives to the DS232AS-N:

  1. MAX232 - Manufactured by Maxim Integrated
  2. SP3232 - Manufactured by Exar Corporation
  3. LTC1480 - Manufactured by Linear Technology

These alternative models offer similar functionality and can be used as replacements based on specific requirements.

In conclusion, the DS232AS-N is a high-speed RS232 transceiver with low power consumption. It provides reliable serial communication and is widely used in various industries. Its compact DIP package and robust features make it a popular choice among designers.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de DS232AS-N en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of DS232AS-N in technical solutions:

  1. Q: What is DS232AS-N? A: DS232AS-N is a serial communication interface chip that allows for bidirectional data transfer between a microcontroller or computer and other devices using the RS232 protocol.

  2. Q: What are the key features of DS232AS-N? A: Some key features of DS232AS-N include support for full-duplex communication, compatibility with various voltage levels, built-in protection against electrostatic discharge (ESD), and low power consumption.

  3. Q: How can DS232AS-N be used in technical solutions? A: DS232AS-N can be used in various technical solutions such as industrial automation systems, embedded systems, robotics, data acquisition systems, and communication interfaces for sensors and actuators.

  4. Q: What is the maximum data rate supported by DS232AS-N? A: DS232AS-N supports a maximum data rate of up to 115.2 kbps, making it suitable for applications requiring high-speed serial communication.

  5. Q: Does DS232AS-N require external components for operation? A: Yes, DS232AS-N requires external components such as capacitors and resistors for proper operation. The datasheet provides guidelines on the recommended values for these components.

  6. Q: Can DS232AS-N be powered directly from a microcontroller or computer? A: No, DS232AS-N requires a separate power supply. It operates at a voltage range of typically +3.0V to +5.5V.

  7. Q: Is DS232AS-N compatible with both 3.3V and 5V logic levels? A: Yes, DS232AS-N is designed to be compatible with both 3.3V and 5V logic levels, making it versatile for use with different microcontrollers and devices.

  8. Q: Does DS232AS-N support flow control? A: Yes, DS232AS-N supports hardware flow control using RTS (Request to Send) and CTS (Clear to Send) signals, allowing for better data transmission control in applications that require it.

  9. Q: Can DS232AS-N be used in harsh industrial environments? A: Yes, DS232AS-N is designed to withstand harsh industrial environments. It has built-in protection against ESD and can operate in a wide temperature range.

  10. Q: Are there any application notes or reference designs available for DS232AS-N? A: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement DS232AS-N in their technical solutions effectively. These resources are available on the manufacturer's website.