MAX1522EUT+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High-Efficiency Step-Up DC-DC Converter
• Package: SOT-23-6
• Essence: Boost Converter
• Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

• Input Voltage Range: 1.8V to 5.5V
• Output Voltage Range: Up to 28V
• Switching Frequency: 1.2MHz
• Maximum Output Current: 100mA
• Efficiency: Up to 90%
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX1522EUT+T has a total of 6 pins arranged as follows:

```

---

| | --| VIN GND |-- Pin 1: VIN - Input Voltage --| EN SW |-- Pin 2: EN - Enable Pin --| FB LX |-- Pin 3: FB - Feedback Pin --| PGND LX |-- Pin 4: PGND - Power Ground --| LX LX |-- Pin 5: LX - Switch Node --| VOUT LX |-- Pin 6: VOUT - Output Voltage |___________| ```

Functional Features

• High-efficiency step-up DC-DC converter
• Internal synchronous rectifier for improved efficiency
• Low quiescent current for extended battery life
• Soft-start feature to reduce inrush current
• Overcurrent and overtemperature protection
• Adjustable output voltage through external resistors

Advantages and Disadvantages

Advantages

• High efficiency results in longer battery life
• Small package size allows for space-saving designs
• Wide input voltage range enables versatile applications
• Overcurrent and overtemperature protection ensures device safety
• Adjustable output voltage provides flexibility in different scenarios

Disadvantages

• Limited maximum output current (100mA)
• Requires external resistors for output voltage adjustment

Working Principles

The MAX1522EUT+T is a boost converter, also known as a step-up DC-DC converter. It takes an input voltage within the range of 1.8V to 5.5V and boosts it to a higher output voltage, which can be set up to 28V. The internal synchronous rectifier improves efficiency by reducing power losses.

The device operates at a switching frequency of 1.2MHz, allowing for smaller external components. It features a soft-start function that gradually increases the output voltage to reduce inrush current during startup.

To adjust the output voltage, external resistors can be connected to the FB pin. This flexibility makes the MAX1522EUT+T suitable for various applications requiring different output voltages.

Detailed Application Field Plans

The MAX1522EUT+T is commonly used in portable electronic devices, such as smartphones, tablets, and portable media players. It is particularly useful in battery-powered applications where efficient power management is crucial.

Some specific application areas include:

1. Battery-powered IoT devices
2. Wearable electronics
3. Portable medical devices
4. Handheld measurement instruments
5. Wireless communication modules

Detailed and Complete Alternative Models

1. MAX17222: High-Efficiency Step-Up DC-DC Converter with Higher Output Current (500mA)
2. MAX8569: High-Efficiency Step-Up DC-DC Converter with Lower Input Voltage Range (0.7V to 5.5V)
3. MAX619: High-Efficiency Step-Up DC-DC Converter with Adjustable Output Voltage and Higher Switching Frequency (2MHz)

These alternative models offer different specifications and features to cater to specific application requirements.

In conclusion, the MAX1522EUT+T is a high-efficiency step-up DC-DC converter that provides reliable power management for various portable electronic devices. Its small package size, wide input voltage range, and adjustable output voltage make it a versatile choice in battery-powered applications. However, its limited maximum output current and the need for external resistors for voltage adjustment should be considered in specific design scenarios.