Maxim Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MAX20038ATIB/V+T
Ver Detalle Hojas de datos

MAX20038ATIB/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: TQFN-EP (Thin Quad Flat No-Lead Exposed Pad)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Switching Frequency: 2.2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX20038ATIB/V+T has a total of 20 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS/TRK: Soft-Start/Tracking Pin
  6. VCC: Supply Voltage
  7. PGND: Power Ground
  8. LX: Switch Node
  9. BST: Bootstrap Capacitor Connection
  10. AGND: Analog Ground
  11. COMP: Compensation Pin
  12. SS/TRK: Soft-Start/Tracking Pin
  13. VOUT: Output Voltage
  14. VOUT: Output Voltage
  15. VOUT: Output Voltage
  16. VOUT: Output Voltage
  17. VOUT: Output Voltage
  18. VOUT: Output Voltage
  19. VOUT: Output Voltage
  20. VOUT: Output Voltage

Functional Features

  • High Efficiency: The MAX20038ATIB/V+T offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: It consumes low power during operation, reducing overall power consumption.
  • Wide Input Voltage Range: It can accept input voltages ranging from 4.5V to 36V, providing flexibility in various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.8V to 5.5V, allowing customization based on specific requirements.
  • Overcurrent Protection: It incorporates overcurrent protection to safeguard the circuit and connected devices.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Wide input voltage range - Adjustable output voltage - Overcurrent protection

Disadvantages: - Limited maximum output current (3A)

Working Principles

The MAX20038ATIB/V+T is a voltage regulator IC that converts the input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency power conversion. The input voltage is first stepped down using a high-frequency switch, and then filtered and regulated to provide a stable output voltage. The feedback mechanism ensures that the output voltage remains within the desired range by adjusting the duty cycle of the switch.

Detailed Application Field Plans

The MAX20038ATIB/V+T finds applications in various fields, including:

  1. Automotive: Power management for automotive electronics, such as infotainment systems, lighting controls, and advanced driver-assistance systems (ADAS).
  2. Industrial: Power supply for industrial automation equipment, motor control systems, and instrumentation devices.
  3. Telecommunications: Voltage regulation for telecom infrastructure, base stations, and network equipment.
  4. Consumer Electronics: Power management for portable devices, smart home appliances, and audio/video equipment.

Detailed and Complete Alternative Models

  1. MAX20039ATIB/V+T: Similar specifications and features, but with a higher maximum output current of 5A.
  2. MAX20040ATIB/V+T: Comparable specifications and features, but with a lower input voltage range of 4.5V to 28V.
  3. MAX20041ATIB/V+T: Alternative model with enhanced overcurrent protection and wider operating temperature range (-40°C to +150°C).

Note: The above alternative models are suggested based on similar characteristics and application requirements. It is recommended to refer to the manufacturer's datasheets for detailed specifications and suitability for specific applications.

Word Count: 529

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX20038ATIB/V+T en soluciones técnicas

  1. What is the input voltage range of MAX20038ATIB/V+T?
    - The input voltage range of MAX20038ATIB/V+T is 4.5V to 60V.

  2. What is the maximum output current of MAX20038ATIB/V+T?
    - MAX20038ATIB/V+T can deliver a maximum output current of 3A.

  3. Can MAX20038ATIB/V+T be used in automotive applications?
    - Yes, MAX20038ATIB/V+T is suitable for automotive applications.

  4. What is the typical efficiency of MAX20038ATIB/V+T?
    - The typical efficiency of MAX20038ATIB/V+T is around 95%.

  5. Is MAX20038ATIB/V+T suitable for use in industrial control systems?
    - Yes, MAX20038ATIB/V+T is suitable for use in industrial control systems.

  6. Does MAX20038ATIB/V+T have built-in overcurrent protection?
    - Yes, MAX20038ATIB/V+T features built-in overcurrent protection.

  7. Can MAX20038ATIB/V+T operate in a wide temperature range?
    - Yes, MAX20038ATIB/V+T can operate in a wide temperature range from -40°C to +125°C.

  8. What type of package does MAX20038ATIB/V+T come in?
    - MAX20038ATIB/V+T is available in a compact, thermally enhanced, 28-pin TQFN package.

  9. Is there an evaluation kit available for MAX20038ATIB/V+T?
    - Yes, an evaluation kit for MAX20038ATIB/V+T is available to aid in design and testing.

  10. Can MAX20038ATIB/V+T be used in battery-powered applications?
    - Yes, MAX20038ATIB/V+T is suitable for use in battery-powered applications due to its wide input voltage range and high efficiency.