Maxim Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MAX505BEAG
Ver Detalle Hojas de datos

MAX505BEAG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance, low-power, voltage regulator
  • Package: 16-pin SSOP (Shrink Small Outline Package)
  • Essence: Regulates and controls voltage levels in electronic devices
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX505BEAG has a total of 16 pins. The pin configuration is as follows:

  1. VOUT: Output Voltage
  2. GND: Ground
  3. FB: Feedback Pin
  4. EN: Enable Pin
  5. VIN: Input Voltage
  6. NC: No Connection
  7. NC: No Connection
  8. NC: No Connection
  9. NC: No Connection
  10. NC: No Connection
  11. NC: No Connection
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. VCC: Supply Voltage

Functional Features

  • High efficiency power conversion
  • Low dropout voltage for improved performance
  • Overcurrent and thermal protection
  • Enable pin for easy on/off control
  • Stable output voltage under varying load conditions

Advantages and Disadvantages

Advantages: - High-performance voltage regulation - Low power consumption - Wide input voltage range - Compact package size - Overcurrent and thermal protection

Disadvantages: - Limited maximum output current (500mA) - Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The MAX505BEAG is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage or load conditions. It achieves this by using internal circuitry to monitor and adjust the voltage levels. The enable pin allows for easy on/off control, while overcurrent and thermal protection mechanisms ensure safe operation.

Detailed Application Field Plans

The MAX505BEAG is commonly used in various electronic devices where precise voltage regulation is required. Some potential application fields include:

  1. Mobile devices: Smartphones, tablets, portable media players
  2. Wireless communication systems: Wi-Fi routers, Bluetooth devices
  3. Consumer electronics: Digital cameras, gaming consoles, LCD displays
  4. Industrial equipment: Test and measurement instruments, automation systems
  5. Automotive electronics: Infotainment systems, navigation devices

Detailed and Complete Alternative Models

  1. MAX506BEAG: Similar specifications, but with higher maximum output current (800mA)
  2. MAX507BEAG: Similar specifications, but with lower dropout voltage (80mV at 100mA)
  3. MAX508BEAG: Similar specifications, but with wider operating temperature range (-40°C to +125°C)

These alternative models offer similar functionality to the MAX505BEAG but may have specific advantages depending on the requirements of the application.

Word count: 410 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX505BEAG en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MAX505BEAG in technical solutions:

  1. Question: What is the MAX505BEAG?
    Answer: The MAX505BEAG is a voltage reference and regulator IC (integrated circuit) commonly used in technical solutions.

  2. Question: What is the purpose of the MAX505BEAG?
    Answer: The MAX505BEAG is designed to provide stable and accurate voltage references and regulators for various electronic applications.

  3. Question: What is the input voltage range supported by the MAX505BEAG?
    Answer: The MAX505BEAG supports an input voltage range of 4.5V to 16V.

  4. Question: What is the output voltage range provided by the MAX505BEAG?
    Answer: The MAX505BEAG can provide output voltages ranging from 1.25V to 12V, depending on the configuration.

  5. Question: Can the MAX505BEAG be used in battery-powered applications?
    Answer: Yes, the MAX505BEAG can be used in battery-powered applications as it has low quiescent current and operates efficiently with low power consumption.

  6. Question: Is the MAX505BEAG suitable for precision voltage references?
    Answer: Yes, the MAX505BEAG is suitable for precision voltage references as it offers excellent line and load regulation, ensuring stable and accurate voltage outputs.

  7. Question: Does the MAX505BEAG have built-in protection features?
    Answer: Yes, the MAX505BEAG includes built-in protection features such as thermal shutdown, short-circuit protection, and reverse-battery protection.

  8. Question: Can the MAX505BEAG be used in automotive applications?
    Answer: Yes, the MAX505BEAG is automotive-grade and can be used in automotive applications that require reliable voltage references and regulators.

  9. Question: What is the operating temperature range of the MAX505BEAG?
    Answer: The MAX505BEAG can operate within a temperature range of -40°C to +125°C, making it suitable for various environments.

  10. Question: Are there any application notes or reference designs available for the MAX505BEAG?
    Answer: Yes, Maxim Integrated provides application notes and reference designs for the MAX505BEAG, which can help users understand its implementation in different technical solutions.

Please note that these questions and answers are general and may vary depending on specific use cases and requirements.