Maxim Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MAX6383XR26D7-T
Ver Detalle Hojas de datos

MAX6383XR26D7-T

Product Overview

Category

MAX6383XR26D7-T belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: XR26D7-T
  • Essence: Voltage regulator
  • Packaging/Quantity: Varies depending on supplier

Specifications

The specifications of MAX6383XR26D7-T are as follows:

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 2.6V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of MAX6383XR26D7-T is as follows:

  1. GND (Ground)
  2. EN (Enable)
  3. FB (Feedback)
  4. OUT (Output)
  5. IN (Input)

Functional Features

The functional features of MAX6383XR26D7-T include:

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit and reverse polarity protection
  • Enable pin for power management control

Advantages and Disadvantages

Advantages: - Efficient voltage regulation - Compact package size - Wide input voltage range - Thermal protection

Disadvantages: - Limited output current capacity - Sensitive to input voltage fluctuations

Working Principles

MAX6383XR26D7-T operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a stable output voltage despite variations in the input voltage. The enable pin allows for power management control, enabling the device to be turned on or off as needed.

Detailed Application Field Plans

MAX6383XR26D7-T finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MAX6383XR26D7-T are: - LM1117-2.6 - LT1761-2.6 - MCP1700-2.6

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

Note: The content provided above is a sample structure for an encyclopedia entry and may not reflect the actual specifications or details of MAX6383XR26D7-T.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX6383XR26D7-T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MAX6383XR26D7-T in technical solutions:

  1. Q: What is MAX6383XR26D7-T? A: MAX6383XR26D7-T is a voltage monitor and reset circuit that provides power supply supervision for microcontrollers, DSPs, and other digital systems.

  2. Q: What is the operating voltage range of MAX6383XR26D7-T? A: The operating voltage range of MAX6383XR26D7-T is from 1.575V to 5.5V.

  3. Q: How does MAX6383XR26D7-T monitor the power supply? A: MAX6383XR26D7-T monitors the power supply by comparing the monitored voltage with a preset threshold voltage.

  4. Q: Can I adjust the threshold voltage of MAX6383XR26D7-T? A: Yes, the threshold voltage of MAX6383XR26D7-T can be adjusted using external resistors.

  5. Q: What is the purpose of the reset output of MAX6383XR26D7-T? A: The reset output of MAX6383XR26D7-T is used to generate a reset signal when the monitored voltage falls below the threshold voltage.

  6. Q: What is the typical reset time delay of MAX6383XR26D7-T? A: The typical reset time delay of MAX6383XR26D7-T is 200ms.

  7. Q: Can I disable the reset function of MAX6383XR26D7-T? A: Yes, the reset function of MAX6383XR26D7-T can be disabled by connecting the MR pin to VCC.

  8. Q: Is MAX6383XR26D7-T suitable for automotive applications? A: Yes, MAX6383XR26D7-T is suitable for automotive applications as it operates over the automotive temperature range and has a wide supply voltage range.

  9. Q: What is the package type of MAX6383XR26D7-T? A: MAX6383XR26D7-T is available in a 6-pin SOT23 package.

  10. Q: Can I use MAX6383XR26D7-T in battery-powered applications? A: Yes, MAX6383XR26D7-T can be used in battery-powered applications as it has low quiescent current and operates at low voltages.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.