The MAX6726KASYD3+T IC has a total of 5 pins arranged as follows:
```
| | --| |-- |____| ```
Pin Description: 1. GND: Ground connection 2. RESET: Active-low reset output 3. VCC: Positive supply voltage 4. MR: Manual reset input 5. TH: Threshold voltage selection input
Advantages: - Low-power consumption ensures minimal impact on overall system power consumption. - Wide operating voltage range allows for compatibility with various power supply configurations. - Small package size enables space-saving integration into compact electronic devices. - High accuracy ensures reliable voltage monitoring and resetting.
Disadvantages: - Limited threshold voltage options may not cover all possible application scenarios. - Lack of built-in hysteresis may result in potential instability during voltage transitions.
The MAX6726KASYD3+T operates by continuously monitoring the supply voltage using an internal voltage reference. When the voltage falls below the selected threshold, the IC generates an active-low reset signal. This signal can be used to reset microcontrollers or other digital circuitry, ensuring proper operation under low-voltage conditions. The manual reset input allows for additional control over the reset function.
The MAX6726KASYD3+T is widely used in various applications where voltage monitoring and resetting are critical. Some specific application fields include:
MAX6715AUTYDD3+T
MAX6730AUTYHD3+T
MAX6741XKSYD3+T
Question: What is the operating voltage range of MAX6726KASYD3+T?
Answer: The operating voltage range of MAX6726KASYD3+T is 1.6V to 5.5V.
Question: What is the typical quiescent current of MAX6726KASYD3+T?
Answer: The typical quiescent current of MAX6726KASYD3+T is 4µA.
Question: Can MAX6726KASYD3+T be used as a voltage supervisor?
Answer: Yes, MAX6726KASYD3+T can be used as a voltage supervisor to monitor power supply voltages and provide reset signals.
Question: What is the output type of MAX6726KASYD3+T?
Answer: MAX6726KASYD3+T has an active-low push-pull output.
Question: What is the maximum delay time for the reset signal in MAX6726KASYD3+T?
Answer: The maximum delay time for the reset signal in MAX6726KASYD3+T is 200ms.
Question: Can MAX6726KASYD3+T tolerate reverse battery connection?
Answer: No, MAX6726KASYD3+T should not be subjected to reverse battery connection.
Question: What is the temperature range for operation of MAX6726KASYD3+T?
Answer: MAX6726KASYD3+T can operate within a temperature range of -40°C to +85°C.
Question: Is MAX6726KASYD3+T RoHS compliant?
Answer: Yes, MAX6726KASYD3+T is RoHS compliant.
Question: Can MAX6726KASYD3+T be used in automotive applications?
Answer: Yes, MAX6726KASYD3+T is suitable for automotive applications as it meets the AEC-Q100 standard.
Question: What is the package type of MAX6726KASYD3+T?
Answer: MAX6726KASYD3+T is available in a 6-pin SOT23 package.