Consulte las especificaciones para obtener detalles del producto.
MAX6730UTVD3+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Reference
- Characteristics: Low Dropout, Precision, Low Quiescent Current
- Package: SOT-23-3
- Essence: Provides a stable voltage reference for various electronic applications
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Output Voltage: 3.0V
- Initial Accuracy: ±0.5%
- Temperature Coefficient: ±50ppm/°C
- Dropout Voltage: 200mV at 1mA
- Quiescent Current: 45µA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MAX6730UTVD3+T has three pins in the SOT-23-3 package:
- VOUT: Output Voltage Pin
- GND: Ground Pin
- VIN: Input Voltage Pin
Functional Features
- Low dropout voltage allows for efficient operation even with low input voltages.
- High initial accuracy ensures precise voltage references.
- Low quiescent current minimizes power consumption.
- Wide operating temperature range enables usage in various environments.
Advantages and Disadvantages
Advantages: - Low dropout voltage enhances efficiency. - High initial accuracy ensures precision in voltage references. - Low quiescent current reduces power consumption. - Wide operating temperature range allows for versatile applications.
Disadvantages: - Limited output voltage options. - SOT-23-3 package may not be suitable for all circuit designs.
Working Principles
The MAX6730UTVD3+T is a voltage reference IC that generates a stable output voltage of 3.0V. It utilizes a bandgap voltage reference circuit to provide accurate and reliable voltage references. The low dropout voltage and low quiescent current make it suitable for battery-powered applications.
Detailed Application Field Plans
The MAX6730UTVD3+T can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment
Detailed and Complete Alternative Models
- MAX6037AAUK30-T: 3.0V Voltage Reference, SOT-23-5 package
- LT1461AIS8-3#PBF: 3.0V Precision Voltage Reference, SOIC-8 package
- REF3030AIDBZT: 3.0V Low Dropout Voltage Reference, SOT-23-3 package
These alternative models offer similar functionality and characteristics to the MAX6730UTVD3+T, providing options for different circuit designs and requirements.
(Note: The content provided above is approximately 250 words. Additional information needs to be added to meet the required word count of 1100 words.)
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX6730UTVD3+T en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of MAX6730UTVD3+T in technical solutions:
Q: What is the MAX6730UTVD3+T? A: The MAX6730UTVD3+T is a voltage detector IC manufactured by Maxim Integrated. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage crosses a certain threshold.
Q: What is the operating voltage range of MAX6730UTVD3+T? A: The operating voltage range of MAX6730UTVD3+T is typically between 1.6V and 5.5V.
Q: How does MAX6730UTVD3+T detect voltage levels? A: MAX6730UTVD3+T uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold voltage. When the input voltage exceeds this threshold, the output of the IC changes state.
Q: What is the output configuration of MAX6730UTVD3+T? A: MAX6730UTVD3+T has an open-drain output configuration, which means it can sink current but cannot source current. An external pull-up resistor is required to pull the output voltage high.
Q: Can MAX6730UTVD3+T be used for overvoltage protection? A: No, MAX6730UTVD3+T is primarily designed for undervoltage detection. It is not suitable for overvoltage protection applications.
Q: What is the typical quiescent current consumption of MAX6730UTVD3+T? A: The typical quiescent current consumption of MAX6730UTVD3+T is very low, usually around 1.5µA.
Q: Can MAX6730UTVD3+T be used in battery-powered applications? A: Yes, MAX6730UTVD3+T's low quiescent current makes it suitable for battery-powered applications where power consumption is a concern.
Q: What is the response time of MAX6730UTVD3+T? A: The response time of MAX6730UTVD3+T is typically very fast, usually within a few microseconds.
Q: Can MAX6730UTVD3+T tolerate voltage transients or noise on the input? A: Yes, MAX6730UTVD3+T has built-in hysteresis to prevent false triggering due to voltage transients or noise on the input.
Q: Is MAX6730UTVD3+T available in different package options? A: Yes, MAX6730UTVD3+T is available in various package options, including SOT23-3 and SC70-3, providing flexibility for different PCB layouts and space constraints.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.