Maxim Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MAX8667ETEAA+T
Ver Detalle Hojas de datos

MAX8667ETEAA+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current
  • Package: 16-TQFN-EP (4mm x 4mm)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel (3000 pieces per reel)

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 600mA
  • Quiescent Current: 17µA (typical)
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX8667ETEAA+T has a total of 16 pins arranged as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS/TRK: Soft-Start/Tracking Pin
  6. LX: Switch Node
  7. PGND: Power Ground
  8. VOUT: Output Voltage

Functional Features

  • High Efficiency: The MAX8667ETEAA+T offers high efficiency power conversion, minimizing energy loss.
  • Low Quiescent Current: With a low quiescent current of only 17µA, the device helps conserve power in standby mode.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.3V, providing flexibility for various applications.
  • Soft-Start Function: The soft-start feature ensures a controlled and gradual increase in output voltage during startup.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low quiescent current for power-saving operation - Adjustable output voltage for versatility - Soft-start function for controlled startup

Disadvantages: - Limited maximum output current (600mA)

Working Principles

The MAX8667ETEAA+T is a voltage regulator IC that converts an input voltage in the range of 2.5V to 5.5V to a regulated output voltage between 0.6V and 3.3V. It achieves high efficiency by utilizing a synchronous buck converter architecture. The device operates at a switching frequency of 1.2MHz, allowing for compact external components.

During startup, the soft-start function gradually increases the output voltage, preventing excessive inrush current. The enable pin (EN) controls the device's operation, allowing for easy on/off control.

Detailed Application Field Plans

The MAX8667ETEAA+T finds applications in various fields, including but not limited to:

  1. Portable Electronics: Power management for smartphones, tablets, and portable media players.
  2. IoT Devices: Voltage regulation for connected devices, sensors, and wearables.
  3. Industrial Equipment: Power supply for control systems, motor drives, and instrumentation.
  4. Automotive Electronics: Voltage regulation for infotainment systems, lighting, and ADAS modules.

Detailed and Complete Alternative Models

  1. MAX8668ETEAA+T: Similar specifications with additional features such as adjustable current limit and thermal shutdown protection.
  2. MAX8669ETEAA+T: Higher maximum output current (1A) with similar characteristics and package.
  3. MAX8670ETEAA+T: Dual-output voltage regulator with independent enable pins and adjustable output voltages.

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 410 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX8667ETEAA+T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MAX8667ETEAA+T in technical solutions:

  1. Q: What is the MAX8667ETEAA+T? A: The MAX8667ETEAA+T is a high-efficiency, synchronous step-down DC-DC converter with integrated power switches.

  2. Q: What is the input voltage range of the MAX8667ETEAA+T? A: The input voltage range of the MAX8667ETEAA+T is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of the MAX8667ETEAA+T? A: The output voltage range of the MAX8667ETEAA+T can be programmed from 0.6V to 3.3V.

  4. Q: What is the maximum output current of the MAX8667ETEAA+T? A: The maximum output current of the MAX8667ETEAA+T is 1.5A.

  5. Q: Can the MAX8667ETEAA+T operate in a low-power mode? A: Yes, the MAX8667ETEAA+T has a low-power mode that reduces the quiescent current to minimize power consumption during light loads.

  6. Q: Does the MAX8667ETEAA+T have built-in protection features? A: Yes, the MAX8667ETEAA+T includes overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

  7. Q: Can the MAX8667ETEAA+T be used in battery-powered applications? A: Yes, the wide input voltage range and low-power mode make the MAX8667ETEAA+T suitable for battery-powered applications.

  8. Q: Does the MAX8667ETEAA+T require any external components? A: Yes, the MAX8667ETEAA+T requires a few external components such as input/output capacitors and an inductor for proper operation.

  9. Q: Is the MAX8667ETEAA+T available in a small package? A: Yes, the MAX8667ETEAA+T is available in a 16-pin TQFN package, which is compact and suitable for space-constrained designs.

  10. Q: What are some typical applications of the MAX8667ETEAA+T? A: The MAX8667ETEAA+T can be used in various applications such as portable devices, IoT devices, industrial equipment, and automotive systems where efficient power conversion is required.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and guidance.