Category: Integrated Circuit (IC)
Use: Non-volatile Memory
Characteristics: - Low-power consumption - High-speed data transfer - Small form factor - Reliable data retention
Package: MSOP-8
Essence: The 11AA161T-I/MS is a non-volatile memory IC that provides high-speed data transfer and reliable data retention in a small form factor package.
Packaging/Quantity: The 11AA161T-I/MS is available in an MSOP-8 package. It is typically sold in reels of 2500 units.
The 11AA161T-I/MS has the following pin configuration:
| Pin Name | Description | |----------|-------------| | VCC | Power supply voltage | | GND | Ground | | SDA | Serial Data Input/Output | | SCL | Serial Clock Input |
The 11AA161T-I/MS utilizes a non-volatile memory technology called Electrically Erasable Programmable Read-Only Memory (EEPROM). It stores data by electrically charging and discharging specific memory cells within the IC. The stored data can be read, modified, or erased using the I2C interface.
The 11AA161T-I/MS is commonly used in various applications, including but not limited to: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - Smart meters
Some alternative models that offer similar functionality to the 11AA161T-I/MS are: - AT24C16 from Microchip Technology Inc. - CAT24C16 from ON Semiconductor - M24C16 from STMicroelectronics
These alternative models provide comparable features and can be considered as substitutes for the 11AA161T-I/MS depending on specific requirements.
Word count: 389 words
What is the operating temperature range of 11AA161T-I/MS?
- The operating temperature range of 11AA161T-I/MS is -40°C to 85°C.
What is the typical supply current for 11AA161T-I/MS?
- The typical supply current for 11AA161T-I/MS is 1.5 mA during read and write operations.
Can 11AA161T-I/MS be used in automotive applications?
- Yes, 11AA161T-I/MS is suitable for automotive applications.
What is the maximum clock frequency supported by 11AA161T-I/MS?
- The maximum clock frequency supported by 11AA161T-I/MS is 1 MHz.
Does 11AA161T-I/MS support sequential read operation?
- Yes, 11AA161T-I/MS supports sequential read operation.
What is the endurance rating of 11AA161T-I/MS?
- The endurance rating of 11AA161T-I/MS is 1 million write cycles.
Is 11AA161T-I/MS compatible with SPI interface?
- Yes, 11AA161T-I/MS is compatible with SPI interface.
What is the package type of 11AA161T-I/MS?
- 11AA161T-I/MS is available in an 8-lead SOIC package.
Can 11AA161T-I/MS operate at low voltage levels?
- Yes, 11AA161T-I/MS can operate at a minimum voltage of 1.7V.
Does 11AA161T-I/MS have built-in write protection?
- Yes, 11AA161T-I/MS features built-in hardware write protection.