AT24C02AN-10SU-1.8-T belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is commonly used for storing and retrieving digital information in various electronic devices.
The AT24C02AN-10SU-1.8-T comes in a small outline integrated circuit (SOIC) package.
The essence of this product lies in its ability to provide non-volatile memory storage in a compact and low-power package.
The AT24C02AN-10SU-1.8-T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The AT24C02AN-10SU-1.8-T has a total of 8 pins, which are as follows:
The AT24C02AN-10SU-1.8-T utilizes an electrically erasable programmable read-only memory (EEPROM) technology. It consists of a grid of memory cells that can be individually programmed or erased using electrical signals. The memory cells store binary data as charges on floating gate transistors.
During operation, the device communicates with the host microcontroller through the I2C interface. The microcontroller sends commands and addresses to read from or write to specific memory locations. The AT24C02AN-10SU-1.8-T responds by transferring the requested data or performing the specified write operation.
The AT24C02AN-10SU-1.8-T finds applications in various electronic devices that require non-volatile memory storage. Some common application fields include:
Sure! Here are 10 common questions and answers related to the application of AT24C02AN-10SU-1.8-T in technical solutions:
Q1: What is AT24C02AN-10SU-1.8-T? A1: AT24C02AN-10SU-1.8-T is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuit manufactured by Microchip Technology. It has a capacity of 2 kilobits (256 bytes) and operates at a voltage of 1.8V.
Q2: What are some typical applications of AT24C02AN-10SU-1.8-T? A2: AT24C02AN-10SU-1.8-T is commonly used for storing small amounts of non-volatile data in various electronic devices, such as smart cards, industrial control systems, medical equipment, and consumer electronics.
Q3: How does AT24C02AN-10SU-1.8-T communicate with other components? A3: AT24C02AN-10SU-1.8-T uses the I2C (Inter-Integrated Circuit) protocol for communication. It has a two-wire serial interface consisting of a data line (SDA) and a clock line (SCL).
Q4: What is the maximum operating frequency of AT24C02AN-10SU-1.8-T? A4: The maximum operating frequency of AT24C02AN-10SU-1.8-T is 400 kHz.
Q5: Can AT24C02AN-10SU-1.8-T be used in both write and read operations? A5: Yes, AT24C02AN-10SU-1.8-T supports both write and read operations. It allows data to be written into its memory cells and read back as needed.
Q6: What is the endurance of AT24C02AN-10SU-1.8-T? A6: The endurance of AT24C02AN-10SU-1.8-T is specified to be a minimum of 1 million write cycles.
Q7: Does AT24C02AN-10SU-1.8-T require an external power supply? A7: Yes, AT24C02AN-10SU-1.8-T requires an external power supply. It operates at a voltage of 1.8V, which needs to be provided by the system.
Q8: Can AT24C02AN-10SU-1.8-T retain data during power loss? A8: Yes, AT24C02AN-10SU-1.8-T is non-volatile, meaning it can retain data even when power is lost. This makes it suitable for applications where data persistence is required.
Q9: Is AT24C02AN-10SU-1.8-T compatible with other EEPROM models? A9: Yes, AT24C02AN-10SU-1.8-T is compatible with other EEPROM models that use the I2C protocol and have similar specifications. However, it's always recommended to refer to the datasheets for compatibility verification.
Q10: Are there any limitations or precautions to consider when using AT24C02AN-10SU-1.8-T? A10: Some limitations include the limited storage capacity (256 bytes), limited endurance (1 million write cycles), and the need for an external power supply. Precautions should be taken to ensure proper voltage levels, avoid excessive write operations, and handle the IC according to ESD (Electrostatic Discharge) guidelines.