La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AT24C04N-10SI-2.7

AT24C04N-10SI-2.7

Overview

Product Category

AT24C04N-10SI-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Electrically erasable: The stored data can be erased and reprogrammed electronically.
  • Non-volatile: The data remains intact even when power is removed.
  • High storage capacity: The AT24C04N-10SI-2.7 has a storage capacity of 4 kilobits (512 bytes).
  • Low power consumption: It operates at a low voltage and consumes minimal power.
  • I2C interface: The chip communicates using the Inter-Integrated Circuit (I2C) protocol.

Package

The AT24C04N-10SI-2.7 comes in an 8-pin Small Outline Integrated Circuit (SOIC) package.

Essence

This EEPROM chip provides reliable and non-volatile data storage with a moderate storage capacity, making it suitable for a wide range of applications.

Packaging/Quantity

The AT24C04N-10SI-2.7 is typically packaged in reels or tubes, with a quantity of 2500 units per reel.

Specifications

  • Memory Capacity: 4 kilobits (512 bytes)
  • Operating Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1 million cycles
  • Data Retention: 100 years

Pin Configuration

The AT24C04N-10SI-2.7 has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | A0 | Device Address Input Bit 0 | | 2 | A1 | Device Address Input Bit 1 | | 3 | A2 | Device Address Input Bit 2 | | 4 | GND | Ground | | 5 | SDA | Serial Data Input/Output | | 6 | SCL | Serial Clock Input | | 7 | WP | Write Protect | | 8 | VCC | Power Supply Voltage |

Functional Features

  • Random Access: Allows reading and writing of data at any memory location.
  • Byte-wise Read/Write: Enables individual byte-level access to the memory.
  • Page Write: Supports writing multiple bytes in a single operation, improving efficiency.
  • Software Write Protection: The WP pin can be used to protect the memory from accidental writes.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Ensures data integrity even during power loss.
  • High endurance: Can withstand frequent write cycles without degradation.
  • Compact size: The small form factor makes it suitable for space-constrained applications.
  • Low power consumption: Ideal for battery-powered devices.

Disadvantages

  • Limited storage capacity: May not be sufficient for applications requiring large amounts of data storage.
  • Relatively slower write speed compared to other memory technologies.

Working Principles

The AT24C04N-10SI-2.7 utilizes EEPROM technology, which allows for electrically erasing and reprogramming of data. It uses an I2C interface for communication with the host device. The memory is organized into multiple pages, each consisting of 16 bytes. Data can be written or read at the byte level, and page writes enable efficient programming of multiple bytes in a single operation.

Detailed Application Field Plans

The AT24C04N-10SI-2.7 finds applications in various fields, including:

  1. Embedded Systems: Used for storing configuration data, calibration parameters, and firmware updates in microcontroller-based systems.
  2. Consumer Electronics: Employed in devices like smart TVs, set-top boxes, and digital cameras for storing user preferences, settings, and log data.
  3. Industrial Automation: Utilized for data logging, equipment configuration, and storing critical information in industrial control systems.
  4. Automotive Electronics: Integrated into automotive modules for storing vehicle-specific data, such as mileage, service history, and user preferences.

Detailed and Complete Alternative Models

  1. AT24C01A: 1 kilobit (128 bytes) EEPROM chip with similar features and package options.
  2. AT24C08N: 8 kilobits (1024 bytes) EEPROM chip with higher storage capacity.
  3. AT24C16N: 16 kilobits (2048 bytes) EEPROM chip offering even greater storage capacity.
  4. AT24C64N: 64 kilobits (8192 bytes) EEPROM chip suitable

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT24C04N-10SI-2.7 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AT24C04N-10SI-2.7 in technical solutions:

  1. Q: What is AT24C04N-10SI-2.7? A: AT24C04N-10SI-2.7 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a capacity of 4 kilobits (512 bytes).

  2. Q: What are the typical applications of AT24C04N-10SI-2.7? A: AT24C04N-10SI-2.7 is commonly used for storing small amounts of non-volatile data in various electronic devices, such as microcontrollers, sensors, and communication modules.

  3. Q: How does AT24C04N-10SI-2.7 communicate with other devices? A: AT24C04N-10SI-2.7 uses the I2C (Inter-Integrated Circuit) protocol for communication, which allows it to connect with other devices using only two wires.

  4. Q: What is the operating voltage range of AT24C04N-10SI-2.7? A: AT24C04N-10SI-2.7 operates within a voltage range of 1.7V to 5.5V, making it compatible with a wide range of systems.

  5. Q: Can AT24C04N-10SI-2.7 be easily integrated into existing circuits? A: Yes, AT24C04N-10SI-2.7 comes in an industry-standard 8-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package, making it easy to integrate into existing circuits.

  6. Q: How many write cycles can AT24C04N-10SI-2.7 endure? A: AT24C04N-10SI-2.7 is specified to withstand a minimum of 1 million write cycles, ensuring its durability for frequent data updates.

  7. Q: What is the maximum clock frequency supported by AT24C04N-10SI-2.7? A: AT24C04N-10SI-2.7 supports a maximum clock frequency of 400 kHz, allowing for fast data transfer in I2C communication.

  8. Q: Can AT24C04N-10SI-2.7 retain data during power loss? A: Yes, AT24C04N-10SI-2.7 has built-in EEPROM technology that allows it to retain data even when the power supply is disconnected.

  9. Q: Is AT24C04N-10SI-2.7 compatible with both 3.3V and 5V systems? A: Yes, AT24C04N-10SI-2.7 is designed to work with both 3.3V and 5V systems, providing flexibility in various applications.

  10. Q: Are there any limitations to consider when using AT24C04N-10SI-2.7? A: One limitation is the limited storage capacity of 4 kilobits, which may not be sufficient for applications requiring large amounts of data storage. Additionally, the I2C bus may have limitations on the maximum number of devices that can be connected.