Consulte las especificaciones para obtener detalles del producto.
AT24C08AY1-10YI-1.8
Product Overview
Category
AT24C08AY1-10YI-1.8 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
Use
This product is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
Characteristics
- Non-volatile: Retains data even when power is removed.
- Electrically erasable: Allows for easy modification of stored data.
- Programmable: Can be written and rewritten multiple times.
- Low power consumption: Operates on low voltage and consumes minimal power.
- High reliability: Offers robust data retention and endurance.
Package
AT24C08AY1-10YI-1.8 is available in a standard 8-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package.
Essence
The essence of AT24C08AY1-10YI-1.8 lies in its ability to provide reliable and non-volatile data storage in a compact and easily integrable form factor.
Packaging/Quantity
This product is typically packaged in reels or tubes, with each reel containing a specific quantity of AT24C08AY1-10YI-1.8 chips. The exact quantity may vary depending on the manufacturer's specifications.
Specifications
- Memory capacity: 8 kilobits (1024 bytes)
- Operating voltage: 1.8V
- Maximum clock frequency: 1 MHz
- Write cycle time: 5 ms (maximum)
- Data retention: 100 years (minimum)
Detailed Pin Configuration
AT24C08AY1-10YI-1.8 features an 8-pin package with the following pin configuration:
- A0: Address input pin 0
- A1: Address input pin 1
- A2: Address input pin 2
- GND: Ground (0V)
- SDA: Serial data input/output
- SCL: Serial clock input
- WP: Write protect
- VCC: Power supply voltage
Functional Features
- Random access: Allows for reading and writing data at any memory location.
- Page write mode: Enables simultaneous programming of multiple bytes within a single page, improving efficiency.
- Software write protection: Provides the ability to protect specific memory areas from being overwritten.
- Sequential read operation: Facilitates efficient retrieval of consecutive data.
Advantages and Disadvantages
Advantages
- Non-volatile storage: Ensures data integrity even during power loss.
- Easy programmability: Allows for convenient modification of stored data.
- Low power consumption: Ideal for battery-powered devices.
- Compact form factor: Suitable for space-constrained applications.
- High reliability: Offers long-term data retention and endurance.
Disadvantages
- Limited storage capacity: May not be suitable for applications requiring large amounts of data storage.
- Relatively slow write cycle time: Longer programming time compared to other memory technologies.
Working Principles
AT24C08AY1-10YI-1.8 utilizes electrically controlled floating gate transistors to store and retrieve data. The memory cells are organized into pages, with each page consisting of multiple bytes. Data can be written by applying appropriate voltage levels to the control pins, and it can be read by accessing the desired memory location through the serial interface.
Detailed Application Field Plans
AT24C08AY1-10YI-1.8 finds extensive use in various applications, including but not limited to: - Embedded systems - Industrial automation - Automotive electronics - Smart meters - Medical devices
Detailed and Complete Alternative Models
Some alternative models to AT24C08AY1-10YI-1.8 include: - AT24C01A: 1 kilobit EEPROM chip - AT24C16B: 16 kilobit EEPROM chip - AT24C64D: 64 kilobit EEPROM chip
These alternatives offer different memory capacities, allowing users to choose the most suitable option for their specific requirements.
Word count: 537 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT24C08AY1-10YI-1.8 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of AT24C08AY1-10YI-1.8 in technical solutions:
Q1: What is AT24C08AY1-10YI-1.8? A1: AT24C08AY1-10YI-1.8 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuit manufactured by Microchip Technology. It has a capacity of 8 kilobits (1 kilobyte) and operates at a voltage of 1.8V.
Q2: What are the typical applications of AT24C08AY1-10YI-1.8? A2: AT24C08AY1-10YI-1.8 is commonly used for storing small amounts of non-volatile data in various electronic devices, such as consumer electronics, industrial equipment, automotive systems, and medical devices.
Q3: How does AT24C08AY1-10YI-1.8 communicate with other components? A3: AT24C08AY1-10YI-1.8 uses the I2C (Inter-Integrated Circuit) protocol for communication. It has a serial interface consisting of a clock line (SCL) and a data line (SDA), which allows it to connect with microcontrollers or other devices supporting I2C.
Q4: What is the maximum operating frequency of AT24C08AY1-10YI-1.8? A4: The maximum operating frequency of AT24C08AY1-10YI-1.8 is 400 kHz, which means it can transfer data at a rate of up to 400 kilobits per second.
Q5: Can AT24C08AY1-10YI-1.8 be used in both write and read operations? A5: Yes, AT24C08AY1-10YI-1.8 supports both write and read operations. It allows you to store data by writing to its memory cells and retrieve the stored data by reading from those cells.
Q6: What is the endurance of AT24C08AY1-10YI-1.8? A6: The endurance of AT24C08AY1-10YI-1.8 is specified as a minimum of 1 million write cycles. This means you can write data to it at least 1 million times before the memory cells start to degrade.
Q7: Does AT24C08AY1-10YI-1.8 require an external power supply? A7: Yes, AT24C08AY1-10YI-1.8 requires a separate power supply. It operates at a voltage of 1.8V, so you need to provide a regulated 1.8V power source for it to function properly.
Q8: Can AT24C08AY1-10YI-1.8 retain data during power loss? A8: Yes, AT24C08AY1-10YI-1.8 is a non-volatile memory, which means it can retain data even when the power is turned off. This makes it suitable for storing important information that needs to be preserved across power cycles.
Q9: Is AT24C08AY1-10YI-1.8 compatible with other EEPROMs? A9: Yes, AT24C08AY1-10YI-1.8 is compatible with other EEPROMs that use the same I2C protocol and have similar specifications. You can replace it with compatible devices if needed.
Q10: Can AT24C08AY1-10YI-1.8 be soldered onto a PCB? A10: Yes, AT24C08AY1-10YI-1.8 is available in a small surface-mount package (8-lead SOIC), which can be easily soldered onto a printed circuit board (PCB) using standard soldering techniques.
Please note that these answers are general and may vary depending on the specific requirements and implementation of your technical solution.