AT24C16-10PC-2.7

Overview

AT24C16-10PC-2.7 is a product belonging to the category of Electrically Erasable Programmable Read-Only Memory (EEPROM). It is commonly used for storing and retrieving data in various electronic devices. This entry provides an overview of the product, including its characteristics, package details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Category

AT24C16-10PC-2.7 falls under the category of Electrically Erasable Programmable Read-Only Memory (EEPROM). EEPROM is a non-volatile memory that allows for electrically erasing and reprogramming of data.

Use

The AT24C16-10PC-2.7 is primarily used for data storage purposes in electronic devices such as microcontrollers, computers, consumer electronics, and automotive applications. It provides a reliable and convenient solution for storing critical information that needs to be retained even when power is removed.

Characteristics

• Non-volatile: The stored data remains intact even when power is disconnected.
• Electrically erasable: Data can be erased and reprogrammed electronically.
• High endurance: Capable of withstanding a large number of erase/write cycles.
• Low power consumption: Operates efficiently with minimal power requirements.
• Small form factor: Compact size enables integration into various electronic devices.

Package and Quantity

AT24C16-10PC-2.7 is available in a standard 8-pin DIP (Dual Inline Package) configuration. Each package contains one unit of the AT24C16-10PC-2.7 EEPROM.

Specifications

• Capacity: 16 kilobits (2 kilobytes)
• Operating voltage: 2.7V to 5.5V
• Operating temperature range: -40°C to +85°C
• Write cycle endurance: 1 million cycles
• Data retention: Up to 100 years

Pin Configuration

The AT24C16-10PC-2.7 EEPROM has the following pin configuration:

| Pin Number | Name | Description | |------------|------|-------------| | 1 | A0 | Address input bit 0 | | 2 | A1 | Address input bit 1 | | 3 | A2 | Address input bit 2 | | 4 | GND | Ground | | 5 | SDA | Serial data input/output | | 6 | SCL | Serial clock input | | 7 | WP | Write protect | | 8 | VCC | Power supply voltage |

Functional Features

• Random access: Allows for reading and writing data at any memory location.
• Byte-level operations: Supports individual byte read and write operations.
• Page write mode: Enables faster data writes by allowing multiple bytes to be written in a single operation.
• Hardware write protection: The WP pin can be used to protect the memory from accidental writes.

Advantages

• Non-volatile storage: Ensures data integrity even during power outages.
• High endurance: Can withstand frequent erase/write cycles without degradation.
• Compact size: Fits well in space-constrained electronic devices.
• Low power consumption: Operates efficiently, conserving energy.

Disadvantages

• Limited capacity: Suitable for small to medium-sized data storage requirements.
• Slower write speed compared to other memory technologies.
• Relatively higher cost per kilobyte compared to other memory options.

Working Principles

AT24C16-10PC-2.7 utilizes a combination of electrically controlled floating gate transistors and charge storage mechanisms to store and retrieve data. The EEPROM's memory cells can be individually programmed or erased by applying specific voltage levels to the control pins.

Application Field Plans

The AT24C16-10PC-2.7 EEPROM finds applications in various fields, including: 1. Microcontroller-based systems: Used for storing program code, configuration settings, and calibration data. 2. Automotive electronics: Stores critical information such as vehicle identification numbers (VIN), mileage, and fault codes. 3. Consumer electronics: Used in devices like smart TVs, set-top boxes, and digital cameras for storing user preferences and firmware updates. 4. Industrial automation: Enables storage of parameters, sensor calibration data, and system configurations.

Alternative Models

For those seeking alternative options, several similar EEPROM models are available in the market, including: - AT24C01A - AT24C02 - AT24C32 - AT24C64

These alternatives offer varying capacities, package types, and voltage requirements, allowing users to choose the most suitable option based on their specific needs.

In conclusion, the AT24C16-10PC-2.7 EEPROM is