Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AT27C010L-55PI
Ver Detalle Hojas de datos

AT27C010L-55PI

Product Overview

Category

AT27C010L-55PI belongs to the category of programmable read-only memory (PROM) chips.

Use

This product is commonly used in electronic devices for storing permanent data that cannot be modified or erased. It provides non-volatile memory storage, making it ideal for applications where data integrity is crucial.

Characteristics

  • Non-volatile: The stored data remains intact even when power is removed.
  • High density: The chip offers a large storage capacity.
  • Fast access time: Provides quick retrieval of data.
  • Durable: Can withstand harsh environmental conditions.
  • Low power consumption: Operates efficiently with minimal power requirements.

Package

AT27C010L-55PI is available in a 32-pin plastic dual in-line package (PDIP). This package type ensures easy integration into various electronic circuits.

Essence

The essence of AT27C010L-55PI lies in its ability to provide reliable and secure storage of data in electronic devices. Its non-volatile nature ensures that critical information remains intact, even during power outages or system failures.

Packaging/Quantity

AT27C010L-55PI is typically packaged in reels or tubes, containing a specific quantity of chips per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Operating voltage: 5V
  • Storage capacity: 1 Megabit (128 Kilobytes)
  • Access time: 55 nanoseconds
  • Operating temperature range: -40°C to +85°C
  • Data retention: Minimum 10 years

Detailed Pin Configuration

The AT27C010L-55PI chip has a total of 32 pins, each serving a specific purpose. The pin configuration is as follows:

  1. A16: Address input
  2. A15: Address input
  3. A12: Address input
  4. A7: Address input
  5. A6: Address input
  6. A5: Address input
  7. A4: Address input
  8. A3: Address input
  9. A2: Address input
  10. A1: Address input
  11. A0: Address input
  12. VPP: Programming voltage supply
  13. OE: Output enable
  14. CE: Chip enable
  15. WE: Write enable
  16. I/O0: Data input/output
  17. I/O1: Data input/output
  18. I/O2: Data input/output
  19. I/O3: Data input/output
  20. I/O4: Data input/output
  21. I/O5: Data input/output
  22. I/O6: Data input/output
  23. I/O7: Data input/output
  24. VCC: Power supply
  25. GND: Ground
  26. NC: No connection
  27. NC: No connection
  28. NC: No connection
  29. NC: No connection
  30. NC: No connection
  31. NC: No connection
  32. NC: No connection

Functional Features

  • High-speed access: The chip offers fast data retrieval, ensuring efficient operation of electronic devices.
  • Easy integration: The pin configuration and package design facilitate seamless integration into various circuit designs.
  • Reliable data storage: AT27C010L-55PI ensures long-term data retention, making it suitable for critical applications.
  • Low power consumption: The chip operates efficiently with minimal power requirements, conserving energy.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data integrity.
  • High storage capacity.
  • Fast access time.
  • Durable and reliable.
  • Low power consumption.

Disadvantages

  • Data cannot be modified or erased once programmed.
  • Limited storage capacity compared to other memory technologies.

Working Principles

AT27C010L-55PI utilizes a technology called electrically programmable read-only memory (EPROM). The chip is initially programmed with the desired data using specialized programming equipment. Once programmed, the data remains stored in the chip even when power is removed. During operation, the chip allows read access to the stored data but does not allow modification or erasure.

Detailed Application Field Plans

AT27C010L-55PI finds applications in various electronic devices and systems, including: 1. Embedded systems 2. Automotive electronics 3. Industrial control systems 4. Medical equipment 5. Communication devices 6. Consumer electronics

The chip's reliable data storage capabilities make it suitable for applications where permanent and secure data storage is essential.

Detailed and Complete Alternative Models

  1. AT27C020: Offers double the storage capacity of AT27C010L-55PI.
  2. AT27C040: Provides four times the storage capacity of AT27C010L-55PI.
  3. AT27C080: Offers

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT27C010L-55PI en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AT27C010L-55PI in technical solutions:

1. What is the AT27C010L-55PI? The AT27C010L-55PI is a 1 Megabit (128K x 8) low-power, high-performance CMOS EPROM (Electrically Programmable Read-Only Memory) integrated circuit.

2. What are the key features of the AT27C010L-55PI? Some key features of the AT27C010L-55PI include a fast access time of 55 ns, low power consumption, wide operating voltage range, and compatibility with various programming equipment.

3. How can the AT27C010L-55PI be used in technical solutions? The AT27C010L-55PI can be used as a non-volatile memory component in various technical solutions such as microcontrollers, embedded systems, industrial control systems, and electronic devices that require reliable storage of data or firmware.

4. What is the maximum operating frequency of the AT27C010L-55PI? The AT27C010L-55PI does not have an operating frequency as it is a non-volatile memory device. It is typically used for storing data or program code that can be accessed at any required frequency by the system.

5. Can the AT27C010L-55PI be reprogrammed? No, the AT27C010L-55PI is a one-time programmable EPROM. Once programmed, the stored data cannot be changed or erased.

6. What is the power supply voltage range for the AT27C010L-55PI? The AT27C010L-55PI operates within a voltage range of 4.5V to 5.5V.

7. Does the AT27C010L-55PI require any external components for operation? No, the AT27C010L-55PI does not require any external components for its basic operation. However, it may require programming equipment or a microcontroller to write data into the memory during the initial programming process.

8. What is the typical power consumption of the AT27C010L-55PI? The AT27C010L-55PI has low power consumption, typically around 30 mA during active read operations and less than 100 µA in standby mode.

9. Can the AT27C010L-55PI withstand high temperatures? Yes, the AT27C010L-55PI is designed to operate reliably within a wide temperature range, typically from -40°C to +85°C.

10. Is the AT27C010L-55PI compatible with standard EPROM programming equipment? Yes, the AT27C010L-55PI is compatible with most standard EPROM programming equipment available in the market. It follows industry-standard pinouts and programming protocols.

Please note that these answers are general and may vary depending on the specific application and requirements.