AT29C1024-15TI

Product Overview

Category

AT29C1024-15TI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

• Non-volatile: The stored data is retained even when power is removed.
• High capacity: The AT29C1024-15TI has a capacity of 1,024 kilobits (128 kilobytes).
• Fast access time: The device operates at a speed of 150 nanoseconds.
• Low power consumption: It requires minimal power to operate efficiently.

Package

The AT29C1024-15TI is available in a standard integrated circuit (IC) package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The AT29C1024-15TI is typically packaged in reels or tubes, with each package containing a specific quantity of devices.

Specifications

• Capacity: 1,024 kilobits (128 kilobytes)
• Access Time: 150 nanoseconds
• Supply Voltage: 5V
• Operating Temperature Range: -40°C to +85°C
• Package Type: Integrated Circuit (IC)

Pin Configuration

The AT29C1024-15TI has a total of 32 pins. Here is the detailed pin configuration:

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. A8 - Address Input
10. A9 - Address Input
11. A10 - Address Input
12. A11 - Address Input
13. A12 - Address Input
14. A13 - Address Input
15. A14 - Address Input
16. A15 - Address Input
17. /OE - Output Enable
18. /WE - Write Enable
19. /CE - Chip Enable
20. VCC - Power Supply
21. DQ0 - Data Input/Output
22. DQ1 - Data Input/Output
23. DQ2 - Data Input/Output
24. DQ3 - Data Input/Output
25. DQ4 - Data Input/Output
26. DQ5 - Data Input/Output
27. DQ6 - Data Input/Output
28. DQ7 - Data Input/Output
29. /RP - Ready/Busy Output
30. /BYTE - Byte/Word Organization Selection
31. GND - Ground
32. NC - No Connection

Functional Features

• Non-volatile storage: The AT29C1024-15TI retains data even when power is removed.
• Fast access time: With an access time of 150 nanoseconds, it provides quick data retrieval.
• Easy integration: The device can be easily integrated into various electronic systems.
• Low power consumption: It operates efficiently with minimal power requirements.

Advantages and Disadvantages

Advantages

• Reliable non-volatile storage
• High capacity for data storage
• Fast access time
• Low power consumption

Disadvantages

• Limited storage capacity compared to other memory devices
• Requires external control signals for proper operation

Working Principles

The AT29C1024-15TI utilizes flash memory technology to store and retrieve digital information. It employs a combination of floating-gate transistors and charge storage to retain data even without power. The device is designed to be electrically erasable and programmable, allowing for easy modification of stored data.

Detailed Application Field Plans

The AT29C1024-15TI is widely used in various electronic systems that require non-volatile memory storage. Some common application fields include:

1. Embedded systems
2. Consumer electronics
3. Automotive electronics
4. Industrial control systems
5. Communication devices

Detailed and Complete Alternative Models

1. AT28C1024-15TI: Similar to the AT29C1024-15TI, but with a different manufacturer.
2. AT49F1024-15TI: Flash memory device with similar capacity and characteristics.
3. AM29F010B-70JC: Another non-volatile memory device with comparable specifications.

These alternative models offer similar functionality and can be considered as alternatives to the AT29C1024-15TI.

Word count: 570 words