La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.

Ver Detalle Hojas de datos

ATSAML10E14A-MF

Product Overview

Category: Microcontroller
Use: Embedded systems, Internet of Things (IoT) devices
Characteristics: Low-power, high-performance, secure
Package: QFN (Quad Flat No-leads)
Essence: ARM Cortex-M23 core microcontroller
Packaging/Quantity: Tray, 250 units per tray

Specifications

Microcontroller Family: SAM L10
Processor Core: ARM Cortex-M23
Operating Voltage Range: 1.62V to 3.63V
Operating Temperature Range: -40°C to +85°C
Flash Memory: 16KB
SRAM: 2KB
Clock Speed: Up to 24MHz
Digital I/O Pins: 14
Analog Input Channels: 6
Serial Communication Interfaces: SPI, I2C, USART
Timers/Counters: 4
Power Consumption: Ultra-low power consumption with multiple sleep modes
Security Features: Hardware-based security, tamper detection, secure boot, and secure firmware update

Detailed Pin Configuration

The ATSAML10E14A-MF microcontroller has a total of 32 pins. The pin configuration is as follows:

Pin 1: VDDANA (Analog Power Supply)
Pin 2: GND (Ground)
Pin 3: PA02 (General Purpose I/O)
Pin 4: PA03 (General Purpose I/O)
Pin 5: PA04 (General Purpose I/O)
Pin 6: PA05 (General Purpose I/O)
Pin 7: PA06 (General Purpose I/O)
Pin 8: PA07 (General Purpose I/O)
Pin 9: PA08 (General Purpose I/O)
Pin 10: PA09 (General Purpose I/O)
Pin 11: PA10 (General Purpose I/O)
Pin 12: PA11 (General Purpose I/O)
Pin 13: PA14 (General Purpose I/O)
Pin 14: PA15 (General Purpose I/O)
Pin 15: GND (Ground)
Pin 16: VDDCORE (Core Power Supply)
Pin 17: VDDIN (Digital Power Supply)
Pin 18: GND (Ground)
Pin 19: PA22 (General Purpose I/O)
Pin 20: PA23 (General Purpose I/O)
Pin 21: PA24 (General Purpose I/O)
Pin 22: PA25 (General Purpose I/O)
Pin 23: PA27 (General Purpose I/O)
Pin 24: PA28 (General Purpose I/O)
Pin 25: PA30 (General Purpose I/O)
Pin 26: PA31 (General Purpose I/O)
Pin 27: GND (Ground)
Pin 28: RESET (Reset Input)
Pin 29: GND (Ground)
Pin 30: VDDIO (I/O Power Supply)
Pin 31: VDDFLASH (Flash Power Supply)
Pin 32: GND (Ground)

Functional Features

Low Power Consumption: The ATSAML10E14A-MF microcontroller is designed for ultra-low power applications, making it suitable for battery-powered devices and energy-efficient systems.
High Performance: With its ARM Cortex-M23 core, the microcontroller offers high processing power and efficient execution of complex tasks.
Secure: The microcontroller incorporates hardware-based security features such as tamper detection, secure boot, and secure firmware update, ensuring the integrity and confidentiality of data.
Flexible I/O: The microcontroller provides a sufficient number of digital I/O pins, analog input channels, and serial communication interfaces (SPI, I2C, USART) for versatile connectivity options.
Small Package Size: The QFN package allows for compact designs and space-saving integration into various applications.

Advantages

Ultra-low power consumption extends battery life in portable devices.
High-performance ARM Cortex-M23 core enables efficient execution of complex tasks.
Hardware-based security features provide robust protection against unauthorized access and tampering.
Flexible I/O options allow for versatile connectivity with other devices.
Small package size facilitates compact and space-saving designs.

Disadvantages

Limited flash memory and SRAM may restrict the complexity and size of applications.
Higher cost compared to lower-end microcontrollers with fewer features.
Requires familiarity with ARM architecture and programming tools.

Working Principles

The ATSAML10E14A-MF microcontroller operates based on the ARM Cortex-M23 core architecture. It executes instructions stored in its flash memory and utilizes its peripherals

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ATSAML10E14A-MF en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ATSAML10E14A-MF in technical solutions:

Q: What is ATSAML10E14A-MF? A: ATSAML10E14A-MF is a microcontroller based on the Arm Cortex-M23 core, designed for low-power applications.
Q: What are the key features of ATSAML10E14A-MF? A: Some key features include ultra-low power consumption, high-performance peripherals, secure boot, and advanced security features.
Q: What are the typical applications of ATSAML10E14A-MF? A: ATSAML10E14A-MF is commonly used in IoT devices, wearables, smart home automation, industrial control systems, and battery-powered applications.
Q: How does ATSAML10E14A-MF achieve low power consumption? A: It incorporates various power-saving techniques such as sleep modes, event system, and peripheral event routing to minimize power consumption during idle periods.
Q: Can I use ATSAML10E14A-MF for secure applications? A: Yes, ATSAML10E14A-MF offers advanced security features like hardware-based encryption, secure boot, and tamper detection to ensure data integrity and protect against unauthorized access.
Q: What programming languages can be used with ATSAML10E14A-MF? A: ATSAML10E14A-MF supports programming in C and C++ using development tools like Atmel Studio or third-party IDEs compatible with Arm Cortex-M processors.
Q: Does ATSAML10E14A-MF have built-in communication interfaces? A: Yes, it has multiple communication interfaces including UART, SPI, I2C, USB, and CAN, making it easy to interface with other devices or peripherals.
Q: Can I connect external sensors or modules to ATSAML10E14A-MF? A: Yes, ATSAML10E14A-MF has a range of GPIO pins that can be used to connect and interface with external sensors, modules, or actuators.
Q: Is there any development board available for ATSAML10E14A-MF? A: Yes, Atmel offers development boards like the SAM L10 Xplained Pro, which provides an easy way to prototype and evaluate ATSAML10E14A-MF in real-world applications.
Q: Where can I find documentation and resources for ATSAML10E14A-MF? A: You can find datasheets, application notes, user manuals, and software libraries on the official Microchip website or community forums dedicated to ATSAML10E14A-MF.