Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MCP112-195I/TO
Ver Detalle Hojas de datos

MCP112-195I/TO

Product Overview

Category

The MCP112-195I/TO belongs to the category of voltage supervisors and reset ICs.

Use

It is used to monitor the power supply voltage level and provide a reset signal to the microcontroller or other digital system in the event of a power failure or voltage drop.

Characteristics

  • Voltage Monitoring: Monitors the power supply voltage.
  • Reset Signal: Provides a reset signal to connected digital systems.
  • Low Power Consumption: Operates with low power consumption.
  • Small Package: Available in a small TO-92 package.

Package

The MCP112-195I/TO is available in a TO-92 package.

Packaging/Quantity

The product is typically packaged in reels, tubes, or trays, and the quantity per package varies based on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 1.0V to 5.5V
  • Reset Threshold Voltage: 4.63V
  • Manual Reset Input: Available
  • Operating Temperature Range: -40°C to 125°C
  • Quiescent Current: 5µA (typical)

Detailed Pin Configuration

The MCP112-195I/TO has three pins: 1. VDD: Power supply input 2. GND: Ground 3. RESET: Reset output

Functional Features

  • Voltage Monitoring: Constantly monitors the input voltage.
  • Reset Output: Provides a reset signal when the voltage falls below the threshold.
  • Manual Reset Input: Allows for manual reset control.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Wide input voltage range
  • Small package size

Disadvantages

  • Limited to monitoring single power supply voltage

Working Principles

The MCP112-195I/TO works by comparing the input voltage with the preset threshold voltage. When the input voltage falls below the threshold, the reset output is activated, signaling a power failure or voltage drop.

Detailed Application Field Plans

The MCP112-195I/TO is commonly used in various applications such as: - Battery-powered devices - Embedded systems - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MCP112-195I/TO include: - MAX809 - ADM811 - TPS3808

This completes the English editing encyclopedia entry structure format for the MCP112-195I/TO, providing comprehensive information about its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MCP112-195I/TO en soluciones técnicas

  1. What is the operating voltage range of MCP112-195I/TO?
    - The operating voltage range of MCP112-195I/TO is 2.0V to 6.0V.

  2. What is the typical reset threshold voltage of MCP112-195I/TO?
    - The typical reset threshold voltage of MCP112-195I/TO is 4.63V.

  3. Can MCP112-195I/TO be used in automotive applications?
    - Yes, MCP112-195I/TO is suitable for automotive applications.

  4. What is the maximum supply current of MCP112-195I/TO?
    - The maximum supply current of MCP112-195I/TO is 5µA.

  5. Is MCP112-195I/TO available in a TO-92 package?
    - Yes, MCP112-195I/TO is available in a TO-92 package.

  6. What is the temperature range for MCP112-195I/TO?
    - The temperature range for MCP112-195I/TO is -40°C to +125°C.

  7. Can MCP112-195I/TO be used in battery-powered applications?
    - Yes, MCP112-195I/TO is suitable for battery-powered applications.

  8. What is the output type of MCP112-195I/TO?
    - The output type of MCP112-195I/TO is active-low.

  9. Does MCP112-195I/TO have a manual reset input?
    - No, MCP112-195I/TO does not have a manual reset input.

  10. What is the typical response time of MCP112-195I/TO?
    - The typical response time of MCP112-195I/TO is 2ms.