La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MCP1702-4002E/TOVAO

MCP1702-4002E/TOVAO

Product Overview

Category

The MCP1702-4002E/TOVAO belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Low dropout voltage: The MCP1702-4002E/TOVAO has a low dropout voltage, allowing it to operate efficiently even when the input voltage is close to the desired output voltage.
  • High output current capability: This voltage regulator can handle high output currents, making it suitable for various applications.
  • Wide input voltage range: It can accept a wide range of input voltages, providing flexibility in different power supply scenarios.
  • Low quiescent current: The MCP1702-4002E/TOVAO has a low quiescent current, minimizing power consumption during standby or idle modes.
  • Thermal shutdown protection: It incorporates thermal shutdown protection to prevent overheating and ensure safe operation.

Package

The MCP1702-4002E/TOVAO is available in a TO-92 package, which is a widely used through-hole package for discrete components.

Essence

The essence of the MCP1702-4002E/TOVAO lies in its ability to regulate voltage levels with high efficiency and reliability.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.7V to 13.2V
  • Output Voltage: 4.0V
  • Output Current: Up to 250mA
  • Dropout Voltage: 178mV (typical) at 250mA
  • Quiescent Current: 2.0µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP1702-4002E/TOVAO has three pins:

  1. VIN (Pin 1): Input voltage pin
  2. VOUT (Pin 2): Output voltage pin
  3. GND (Pin 3): Ground pin

Functional Features

  • Voltage Regulation: The MCP1702-4002E/TOVAO maintains a stable output voltage of 4.0V, regardless of variations in the input voltage.
  • Load Regulation: It provides excellent load regulation, ensuring that the output voltage remains constant even with varying loads.
  • Short Circuit Protection: This voltage regulator incorporates short circuit protection, safeguarding the circuit from damage in case of a short circuit condition.
  • Reverse Polarity Protection: It offers reverse polarity protection, preventing damage to the device if the input voltage is accidentally connected in reverse.

Advantages and Disadvantages

Advantages

  • High output current capability allows for versatile applications.
  • Wide input voltage range provides flexibility in power supply options.
  • Low dropout voltage ensures efficient operation even with small voltage differentials.
  • Thermal shutdown protection prevents overheating and enhances safety.
  • Compact TO-92 package facilitates easy integration into circuits.

Disadvantages

  • Limited output voltage options restrict its use in certain applications requiring different voltage levels.
  • Relatively low output current compared to some other voltage regulators available in the market.

Working Principles

The MCP1702-4002E/TOVAO operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By maintaining a constant voltage drop across the pass transistor, it ensures a stable output voltage regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

The MCP1702-4002E/TOVAO finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - Embedded systems - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. MCP1702-3302E/TOVAO: Output voltage of 3.3V, otherwise similar specifications.
  2. MCP1702-5002E/TOVAO: Output voltage of 5.0V, otherwise similar specifications.
  3. MCP1702-1802E/TOVAO: Output voltage of 1.8V, otherwise similar specifications.

These alternative models provide different output voltage options while maintaining similar characteristics and functionality as the MCP1702-4002E/TOVAO.

Note: The above information is based on general knowledge and may vary depending on specific manufacturer datasheets and revisions.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MCP1702-4002E/TOVAO en soluciones técnicas

  1. What is the maximum input voltage for MCP1702-4002E/TOVAO?
    - The maximum input voltage for MCP1702-4002E/TOVAO is 16V.

  2. What is the typical output current for MCP1702-4002E/TOVAO?
    - The typical output current for MCP1702-4002E/TOVAO is 250mA.

  3. What is the dropout voltage of MCP1702-4002E/TOVAO?
    - The dropout voltage of MCP1702-4002E/TOVAO is typically 178mV at 250mA load.

  4. Can MCP1702-4002E/TOVAO be used in battery-powered applications?
    - Yes, MCP1702-4002E/TOVAO is suitable for battery-powered applications due to its low quiescent current.

  5. Is MCP1702-4002E/TOVAO a low-dropout regulator (LDO)?
    - Yes, MCP1702-4002E/TOVAO is an LDO regulator.

  6. What is the operating temperature range for MCP1702-4002E/TOVAO?
    - The operating temperature range for MCP1702-4002E/TOVAO is -40°C to 125°C.

  7. Can MCP1702-4002E/TOVAO be used in automotive electronics?
    - Yes, MCP1702-4002E/TOVAO is AEC-Q100 qualified and suitable for automotive applications.

  8. Does MCP1702-4002E/TOVAO require external capacitors for stability?
    - No, MCP1702-4002E/TOVAO is stable with no external capacitors required.

  9. What is the package type for MCP1702-4002E/TOVAO?
    - MCP1702-4002E/TOVAO is available in a TO-92 package.

  10. Is MCP1702-4002E/TOVAO suitable for low-power microcontroller applications?
    - Yes, MCP1702-4002E/TOVAO is well-suited for low-power microcontroller and sensor applications due to its low quiescent current and small footprint.