MCP1711T-22I/5X

Product Overview

Category

The MCP1711T-22I/5X belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

• Input Voltage Range: 2.7V to 6.0V
• Output Voltage: 2.2V
• Maximum Output Current: 250mA
• Low Dropout Voltage: 178mV at 250mA
• Low Quiescent Current: 120μA
• Shutdown Current: 0.1μA
• Operating Temperature Range: -40°C to +125°C

Package

The MCP1711T-22I/5X is available in a SOT-23-5 package.

Essence

This voltage regulator is designed to provide a stable output voltage with low dropout and quiescent current, making it suitable for various applications.

Packaging/Quantity

The MCP1711T-22I/5X is typically packaged in reels containing 3000 units.

Specifications

• Input Voltage Range: 2.7V to 6.0V
• Output Voltage: 2.2V
• Output Current: Up to 250mA
• Dropout Voltage: 178mV at 250mA
• Quiescent Current: 120μA
• Shutdown Current: 0.1μA
• Operating Temperature Range: -40°C to +125°C
• Package Type: SOT-23-5

Detailed Pin Configuration

The MCP1711T-22I/5X has five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: VOUT (Output Voltage) Pin 4: NC (No Connection) Pin 5: EN (Enable)

Functional Features

• Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
• Low quiescent current minimizes power consumption in standby or idle modes.
• Shutdown mode reduces current consumption to an extremely low level when the regulator is not in use.
• Wide operating temperature range allows for reliable performance in various environments.

Advantages and Disadvantages

Advantages

• Stable output voltage regulation
• Low dropout voltage
• Low quiescent current
• Shutdown mode for power-saving
• Wide operating temperature range

Disadvantages

• Limited maximum output current (250mA)

Working Principles

The MCP1711T-22I/5X operates as a linear voltage regulator. It uses a pass transistor to regulate the output voltage based on the difference between the input and desired output voltage. The internal circuitry ensures that the output voltage remains constant, even with variations in the input voltage and load conditions.

Detailed Application Field Plans

The MCP1711T-22I/5X can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MCP1711T-22I/5X include: - MCP1700T-3302E/TT: 3.3V output voltage, SOT-23-3 package - MCP1702T-5002E/TT: 5.0V output voltage, SOT-23-3 package - MCP1703T-3302E/TT: 3.3V output voltage, SOT-23-3 package - MCP1703T-5002E/TT: 5.0V output voltage, SOT-23-3 package

These alternative models can be considered based on specific requirements and design constraints.

Word Count: 446 words