Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MCP19110T-E/MJ
Ver Detalle Hojas de datos

MCP19110T-E/MJ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management Controller
  • Characteristics: High-performance, versatile, and efficient
  • Package: TSSOP-20
  • Essence: Advanced power management solution
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 32V
  • Output Voltage Range: 0.3V to 24V
  • Maximum Output Current: 1A
  • Switching Frequency: Up to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP19110T-E/MJ features a TSSOP-20 package with the following pin configuration:

  1. VDD - Power Supply Voltage
  2. VIN - Input Voltage
  3. PGND - Power Ground
  4. SW - Switch Node
  5. FB - Feedback Voltage
  6. COMP - Compensation Node
  7. CS - Current Sense
  8. SS - Soft-Start
  9. EN - Enable
  10. RT - Oscillator Timing Resistor
  11. CT - Oscillator Timing Capacitor
  12. AGND - Analog Ground
  13. VREF - Reference Voltage
  14. VOUT - Output Voltage
  15. PGND - Power Ground
  16. PGND - Power Ground
  17. PGND - Power Ground
  18. PGND - Power Ground
  19. PGND - Power Ground
  20. PGND - Power Ground

Functional Features

  • Advanced control algorithms for optimal power management
  • Adaptive voltage positioning for improved efficiency
  • Programmable output voltage and current limits
  • Integrated synchronous buck converter
  • Comprehensive protection features (overvoltage, undervoltage, overcurrent)

Advantages and Disadvantages

Advantages: - High-performance power management solution - Versatile and efficient operation - Advanced control algorithms for optimal performance - Programmable output voltage and current limits

Disadvantages: - Limited maximum output current (1A) - Relatively high operating temperature range (-40°C to +125°C)

Working Principles

The MCP19110T-E/MJ is a power management controller that utilizes advanced control algorithms to regulate the output voltage and current. It features an integrated synchronous buck converter, which efficiently converts the input voltage to the desired output voltage. The controller continuously monitors the feedback voltage and adjusts the duty cycle of the switching transistor to maintain the desired output voltage. It also incorporates adaptive voltage positioning, which optimizes the efficiency by dynamically adjusting the output voltage based on load conditions.

Detailed Application Field Plans

The MCP19110T-E/MJ finds applications in various fields, including:

  1. Power supplies for industrial equipment
  2. Battery charging systems
  3. LED lighting solutions
  4. Automotive electronics
  5. Renewable energy systems
  6. Telecommunications equipment

Detailed and Complete Alternative Models

  1. MCP19111T-E/MJ
  2. MCP19112T-E/MJ
  3. MCP19113T-E/MJ
  4. MCP19114T-E/MJ
  5. MCP19115T-E/MJ

These alternative models offer similar functionality and characteristics, providing flexibility for different application requirements.

Word count: 305 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MCP19110T-E/MJ en soluciones técnicas

  1. What is the maximum input voltage for MCP19110T-E/MJ?
    - The maximum input voltage for MCP19110T-E/MJ is 42V.

  2. What is the typical operating frequency range for MCP19110T-E/MJ?
    - The typical operating frequency range for MCP19110T-E/MJ is 100kHz to 1MHz.

  3. Can MCP19110T-E/MJ be used in automotive applications?
    - Yes, MCP19110T-E/MJ is suitable for automotive applications.

  4. What is the maximum output current capability of MCP19110T-E/MJ?
    - The maximum output current capability of MCP19110T-E/MJ is 5A.

  5. Is MCP19110T-E/MJ compatible with digital power management systems?
    - Yes, MCP19110T-E/MJ is compatible with digital power management systems.

  6. What is the typical efficiency of MCP19110T-E/MJ?
    - The typical efficiency of MCP19110T-E/MJ is over 90%.

  7. Does MCP19110T-E/MJ have built-in protection features?
    - Yes, MCP19110T-E/MJ includes overcurrent protection and thermal shutdown features.

  8. Can MCP19110T-E/MJ be used in battery charging applications?
    - Yes, MCP19110T-E/MJ can be used in battery charging applications.

  9. What is the operating temperature range for MCP19110T-E/MJ?
    - The operating temperature range for MCP19110T-E/MJ is -40°C to 125°C.

  10. Is there a development tool available for designing with MCP19110T-E/MJ?
    - Yes, Microchip provides a development tool called the MCP19110 Digital PFC/PWM Combo Controller Evaluation Board for designing with MCP19110T-E/MJ.