Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MIC24085FYML-TX
Ver Detalle Hojas de datos

MIC24085FYML-TX

Product Overview

Category

MIC24085FYML-TX belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

MIC24085FYML-TX is available in a small form factor package, which allows for easy integration into various electronic devices.

Essence

The essence of this product lies in its ability to regulate voltage and efficiently manage power in electronic devices.

Packaging/Quantity

MIC24085FYML-TX is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1.5A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

MIC24085FYML-TX has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switching pin
  6. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for compatibility with various power sources.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Enable pin provides control over the device's operation.
  • Feedback pin enables precise voltage regulation.
  • Switching pin facilitates efficient power management.
  • Output voltage pin delivers regulated voltage to the connected device.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • High efficiency results in reduced power consumption and heat generation.
  • Wide input voltage range enhances compatibility with different power sources.
  • Precise voltage regulation ensures stable performance of connected devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

MIC24085FYML-TX operates based on a switching regulator principle. It utilizes an internal control circuitry to regulate the input voltage and efficiently manage power delivery to the connected device. The feedback mechanism continuously monitors the output voltage and adjusts the switching frequency to maintain the desired voltage level.

Detailed Application Field Plans

MIC24085FYML-TX finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC24085FYML-TX are: - LT1763 - LM2596 - TPS54331 - ADP2302

These models can be considered as alternatives depending on specific requirements and design constraints.

Word count: 346 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC24085FYML-TX en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MIC24085FYML-TX in technical solutions:

  1. Q: What is MIC24085FYML-TX? A: MIC24085FYML-TX is a specific model of a power management integrated circuit (PMIC) designed by Microchip Technology.

  2. Q: What are the key features of MIC24085FYML-TX? A: Some key features of MIC24085FYML-TX include high efficiency, wide input voltage range, multiple output channels, and built-in protection mechanisms.

  3. Q: What is the typical application of MIC24085FYML-TX? A: MIC24085FYML-TX is commonly used in various technical solutions that require power management, such as industrial automation, consumer electronics, and automotive applications.

  4. Q: What is the maximum input voltage supported by MIC24085FYML-TX? A: MIC24085FYML-TX can handle an input voltage range from 4.5V to 42V.

  5. Q: How many output channels does MIC24085FYML-TX have? A: MIC24085FYML-TX has four independent output channels.

  6. Q: What is the maximum output current per channel for MIC24085FYML-TX? A: Each output channel of MIC24085FYML-TX can provide a maximum output current of up to 1.5A.

  7. Q: Does MIC24085FYML-TX support overcurrent protection? A: Yes, MIC24085FYML-TX has built-in overcurrent protection for each output channel.

  8. Q: Can MIC24085FYML-TX operate in a wide temperature range? A: Yes, MIC24085FYML-TX is designed to operate reliably in a temperature range from -40°C to +125°C.

  9. Q: Does MIC24085FYML-TX require any external components for operation? A: Yes, MIC24085FYML-TX requires external input and output capacitors, as well as other passive components depending on the specific application.

  10. Q: Is there any evaluation board available for MIC24085FYML-TX? A: Yes, Microchip Technology provides an evaluation board for MIC24085FYML-TX, which can help in testing and prototyping applications using this PMIC.

Please note that these answers are general and may vary based on the specific requirements and datasheet of MIC24085FYML-TX.