Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MIC26600YJL-TR
Ver Detalle Hojas de datos

MIC26600YJL-TR

Product Overview

Category

The MIC26600YJL-TR belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This product is primarily used for voltage regulation and power distribution in various electronic devices and systems.

Characteristics

  • High efficiency: The MIC26600YJL-TR offers excellent power conversion efficiency, minimizing energy loss during operation.
  • Wide input voltage range: It can handle a wide range of input voltages, making it suitable for diverse applications.
  • Low quiescent current: The device consumes minimal current when in standby mode, conserving power.
  • Overcurrent protection: It incorporates built-in overcurrent protection to safeguard connected components from damage.

Package

The MIC26600YJL-TR is available in a compact and industry-standard 20-pin QFN package. This package ensures efficient heat dissipation and ease of integration into circuit boards.

Essence

The essence of the MIC26600YJL-TR lies in its ability to efficiently regulate and distribute power within electronic systems, ensuring stable and reliable operation.

Packaging/Quantity

The product is typically packaged in reels, with each reel containing a specific quantity of MIC26600YJL-TR ICs. The exact quantity per reel may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 2A
  • Quiescent Current: 100µA (typical)
  • Switching Frequency: Adjustable up to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC26600YJL-TR features a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. EN: Enable pin for controlling the device's operation
  3. SS/TRK: Soft-start and tracking control pin
  4. FB: Feedback pin for regulating the output voltage
  5. COMP: Compensation pin for stability optimization
  6. VCC: Supply voltage pin for internal circuitry
  7. PGND: Power ground pin
  8. SW: Switching node pin for power distribution 9-12. NC: No connection pins
  9. BOOT: Bootstrap capacitor connection pin
  10. LX: Inductor connection pin
  11. AGND: Analog ground pin
  12. PG: Power good indicator pin 17-20. NC: No connection pins

Functional Features

The MIC26600YJL-TR offers several functional features that enhance its performance and usability:

  • Wide input voltage range allows compatibility with various power sources.
  • Adjustable switching frequency enables optimization for different applications.
  • Soft-start and tracking control ensure smooth startup and transient response.
  • Overcurrent protection safeguards connected components from excessive current flow.
  • Power good indicator provides a signal indicating stable output voltage.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption and heat generation.
  • Wide input voltage range enhances versatility and compatibility.
  • Compact package facilitates easy integration into circuit designs.
  • Overcurrent protection prevents damage to connected devices.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Complex pin configuration may require careful attention during circuit design.

Working Principles

The MIC26600YJL-TR operates based on a switching regulator topology, specifically a buck converter. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage. By rapidly switching the input voltage, it achieves the desired output voltage level through efficient energy transfer.

Detailed Application Field Plans

The MIC26600YJL-TR finds applications in various fields, including but not limited to:

  1. Industrial automation: Power management for motor control systems, PLCs, and industrial sensors.
  2. Automotive electronics: Voltage regulation for automotive lighting, infotainment systems, and powertrain control modules.
  3. Telecommunications: Power distribution for network equipment, base stations, and communication devices.
  4. Consumer electronics: Voltage regulation for smartphones, tablets, and portable electronic devices.
  5. Renewable energy: Power management for solar panels, wind turbines, and energy storage systems.

Detailed and Complete Alternative Models

  1. MIC26601YJL-TR: Similar to the MIC26600YJL-TR with a higher maximum output current of 3A.
  2. MIC26602YJL-TR: Offers dual-channel functionality for simultaneous voltage regulation of multiple outputs.
  3. MIC26603YJL-TR: Provides enhanced overcurrent protection features for increased system reliability.

These alternative models offer similar functionalities to the MIC26600YJL-TR while catering to specific requirements or offering additional

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC26600YJL-TR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MIC26600YJL-TR in technical solutions:

  1. Q: What is the MIC26600YJL-TR? A: The MIC26600YJL-TR is a high-voltage, low-side MOSFET driver IC designed for driving power MOSFETs in various applications.

  2. Q: What is the maximum voltage rating of the MIC26600YJL-TR? A: The MIC26600YJL-TR has a maximum voltage rating of 100V.

  3. Q: What is the typical operating voltage range for the MIC26600YJL-TR? A: The typical operating voltage range for the MIC26600YJL-TR is between 4.5V and 16V.

  4. Q: Can the MIC26600YJL-TR be used to drive other types of transistors besides MOSFETs? A: No, the MIC26600YJL-TR is specifically designed for driving power MOSFETs and may not be suitable for other transistor types.

  5. Q: What is the maximum output current capability of the MIC26600YJL-TR? A: The MIC26600YJL-TR can provide a maximum peak output current of 4A.

  6. Q: Does the MIC26600YJL-TR have built-in protection features? A: Yes, the MIC26600YJL-TR includes various protection features such as thermal shutdown, undervoltage lockout, and overcurrent protection.

  7. Q: Can the MIC26600YJL-TR operate in a wide temperature range? A: Yes, the MIC26600YJL-TR is designed to operate in a temperature range of -40°C to 125°C.

  8. Q: What is the typical switching frequency of the MIC26600YJL-TR? A: The typical switching frequency of the MIC26600YJL-TR is around 500kHz.

  9. Q: Can the MIC26600YJL-TR be used in automotive applications? A: Yes, the MIC26600YJL-TR is suitable for automotive applications as it meets the necessary automotive standards.

  10. Q: Are there any evaluation boards or reference designs available for the MIC26600YJL-TR? A: Yes, Microchip provides evaluation boards and reference designs for the MIC26600YJL-TR, which can help in understanding its application and performance in different circuits.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific guidance.