MIC28512-2YFL-T5 belongs to the category of voltage regulators.
This product is primarily used for regulating voltage in electronic circuits.
MIC28512-2YFL-T5 comes in a compact package, suitable for surface mount applications.
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The MIC28512-2YFL-T5 has the following pin configuration:
MIC28512-2YFL-T5 operates as a linear voltage regulator. It takes an input voltage and regulates it to a desired output voltage using a feedback mechanism. The feedback pin (FB) is connected to an external resistor divider network, which sets the output voltage. The enable pin (EN) controls the regulator's operation, allowing it to be turned on or off as required.
MIC28512-2YFL-T5 finds applications in various electronic devices, including but not limited to:
Other alternative models that can be considered as substitutes for MIC28512-2YFL-T5 include:
These alternative models offer similar functionality and can be chosen based on specific requirements and availability.
In conclusion, MIC28512-2YFL-T5 is a voltage regulator with high efficiency, adjustable output voltage, and various protection features. It finds applications in a wide range of electronic devices and has alternative models available for substitution.
Sure! Here are 10 common questions and answers related to the application of MIC28512-2YFL-T5 in technical solutions:
Q: What is the MIC28512-2YFL-T5? A: The MIC28512-2YFL-T5 is a high-efficiency, synchronous step-down regulator designed for various power supply applications.
Q: What is the input voltage range of MIC28512-2YFL-T5? A: The input voltage range of MIC28512-2YFL-T5 is typically between 4.5V and 75V.
Q: What is the output voltage range of MIC28512-2YFL-T5? A: The output voltage range of MIC28512-2YFL-T5 can be adjusted from 0.8V to 60V.
Q: What is the maximum output current of MIC28512-2YFL-T5? A: The maximum output current of MIC28512-2YFL-T5 is 5A.
Q: Is the MIC28512-2YFL-T5 suitable for automotive applications? A: Yes, the MIC28512-2YFL-T5 is designed to meet the requirements of automotive applications.
Q: Does the MIC28512-2YFL-T5 have built-in protection features? A: Yes, the MIC28512-2YFL-T5 includes overcurrent protection, thermal shutdown, and undervoltage lockout features.
Q: Can the MIC28512-2YFL-T5 operate in a wide temperature range? A: Yes, the MIC28512-2YFL-T5 is specified to operate in a temperature range of -40°C to +125°C.
Q: What is the efficiency of MIC28512-2YFL-T5? A: The efficiency of MIC28512-2YFL-T5 can reach up to 95% under typical operating conditions.
Q: Does the MIC28512-2YFL-T5 require an external compensation network? A: No, the MIC28512-2YFL-T5 has an internal compensation network, simplifying the design process.
Q: Are evaluation boards available for the MIC28512-2YFL-T5? A: Yes, evaluation boards are available to help users quickly evaluate and prototype with the MIC28512-2YFL-T5.
Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.