MIC5206-2.85BM5-TR

Product Overview

Category

The MIC5206-2.85BM5-TR belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

• Voltage Output: 2.85V
• Package Type: SOT-23-5
• Essence: Low dropout voltage regulator
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

The MIC5206-2.85BM5-TR has the following specifications:

• Input Voltage Range: 2.3V to 16V
• Dropout Voltage: 40mV at 100mA
• Output Current: 150mA
• Line Regulation: 0.04% (typical)
• Load Regulation: 0.1% (typical)
• Quiescent Current: 120µA (typical)

Detailed Pin Configuration

The MIC5206-2.85BM5-TR has a SOT-23-5 package with the following pin configuration:

```

---

| | |____| | | 1 || 5 || 2 || 4 || 3 |__| ```

Pin 1: Enable (EN) Pin 2: Ground (GND) Pin 3: Output (OUT) Pin 4: Not Connected (NC) Pin 5: Input (IN)

Functional Features

• Low dropout voltage: The MIC5206-2.85BM5-TR exhibits a low dropout voltage of only 40mV at 100mA output current, ensuring efficient power conversion.
• Wide input voltage range: It can accept input voltages ranging from 2.3V to 16V, making it suitable for various applications.
• Low quiescent current: With a typical quiescent current of only 120µA, this voltage regulator minimizes power consumption in standby or low-load conditions.

Advantages and Disadvantages

Advantages

• Stable output voltage: The MIC5206-2.85BM5-TR provides a regulated output voltage of 2.85V, ensuring consistent performance of connected devices.
• Small package size: The SOT-23-5 package allows for compact circuit designs, making it ideal for space-constrained applications.
• Easy integration: This voltage regulator can be easily integrated into existing electronic circuits due to its simple pin configuration.

Disadvantages

• Limited output current: The MIC5206-2.85BM5-TR has a maximum output current of 150mA, which may not be sufficient for high-power applications.
• Not suitable for high input voltages: While it can accept input voltages up to 16V, it is not recommended for use with higher voltage levels.

Working Principles

The MIC5206-2.85BM5-TR operates based on the principle of linear voltage regulation. It utilizes a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By maintaining a constant voltage drop across the pass transistor, it ensures a stable output voltage regardless of variations in the input voltage.

Detailed Application Field Plans

The MIC5206-2.85BM5-TR finds applications in various fields, including:

1. Battery-powered devices: It can be used in portable electronics such as smartphones, tablets, and wearable devices to provide a stable voltage supply.
2. Automotive electronics: This voltage regulator is suitable for automotive applications, including infotainment systems, navigation devices, and lighting control modules.
3. Industrial equipment: It can be employed in industrial automation systems, control panels, and sensor modules to regulate voltage levels reliably.
4. Communication devices: The MIC5206-2.85BM5-TR is commonly used in routers, modems, and wireless communication devices to ensure consistent power supply.

Detailed and Complete Alternative Models

1. LM1117-2.85: This voltage regulator offers similar specifications and pin configuration as the MIC5206-2.85BM5-TR.
2. LT1763-2.85: Another alternative with comparable characteristics, suitable for low dropout voltage applications.
3. LP2985-2.85: This voltage regulator provides a stable 2.85V output and is available in various package options.

These alternative models can be considered based on specific requirements and availability.

Word count: 550 words