Consulte las especificaciones para obtener detalles del producto.
MIC5365-2.6YMT TR
Product Overview
Category
The MIC5365-2.6YMT TR belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact package size
- Low power consumption
- Wide input voltage range
- High efficiency
Package
The MIC5365-2.6YMT TR comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of several hundred units per package.
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage: 2.6V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MIC5365-2.6YMT TR has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- BYP: Bypass capacitor pin
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage for efficient operation
- Built-in thermal shutdown protection
- Short-circuit current limit
- Low quiescent current for power-saving applications
- Fast transient response
Advantages and Disadvantages
Advantages
- Small package size allows for space-saving designs
- Wide input voltage range enables compatibility with various power sources
- High efficiency results in minimal power loss
- Thermal shutdown protection ensures safe operation
- Fast transient response for quick voltage regulation
Disadvantages
- Limited output current capacity (up to 150mA)
- Dropout voltage may affect performance in low input voltage scenarios
Working Principles
The MIC5365-2.6YMT TR operates based on a linear voltage regulator principle. It takes an input voltage within the specified range and regulates it to a stable 2.6V output. The internal circuitry of the regulator maintains the desired output voltage by adjusting the current flow through the device.
Detailed Application Field Plans
The MIC5365-2.6YMT TR finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the MIC5365-2.6YMT TR include: - LM1117-2.6 - MCP1702-2.6 - TPS73625
These alternatives can be considered based on specific requirements and design constraints.
Word count: 314 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC5365-2.6YMT TR en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of MIC5365-2.6YMT TR in technical solutions:
Q: What is the MIC5365-2.6YMT TR? A: The MIC5365-2.6YMT TR is a low dropout (LDO) voltage regulator IC.
Q: What is the input voltage range for the MIC5365-2.6YMT TR? A: The input voltage range for this LDO regulator is typically between 2.3V and 5.5V.
Q: What is the output voltage of the MIC5365-2.6YMT TR? A: The output voltage of this LDO regulator is fixed at 2.6V.
Q: What is the maximum output current of the MIC5365-2.6YMT TR? A: The maximum output current of this LDO regulator is 150mA.
Q: What is the dropout voltage of the MIC5365-2.6YMT TR? A: The dropout voltage of this LDO regulator is typically 100mV at 150mA load.
Q: What is the quiescent current of the MIC5365-2.6YMT TR? A: The quiescent current of this LDO regulator is typically 45µA.
Q: What is the operating temperature range for the MIC5365-2.6YMT TR? A: The operating temperature range for this LDO regulator is -40°C to +125°C.
Q: What protection features does the MIC5365-2.6YMT TR have? A: This LDO regulator has built-in protection features such as thermal shutdown and current limit.
Q: What is the package type of the MIC5365-2.6YMT TR? A: The MIC5365-2.6YMT TR comes in a 4-pin Thin SOT-23 package.
Q: What are some typical applications for the MIC5365-2.6YMT TR? A: This LDO regulator is commonly used in battery-powered devices, portable electronics, and other low-power applications requiring a stable 2.6V power supply.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for the MIC5365-2.6YMT TR.