Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC16C71-04I/P
Ver Detalle Hojas de datos

PIC16C71-04I/P

Product Overview

Category

The PIC16C71-04I/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • Low power consumption
  • High performance
  • Compact size
  • Versatile functionality

Package

The PIC16C71-04I/P is available in a 40-pin plastic dual inline package (PDIP).

Essence

The essence of the PIC16C71-04I/P lies in its ability to provide efficient and reliable control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC16C71-04I/P is typically packaged in reels or tubes, with a quantity of 25 units per reel/tube.

Specifications

  • Architecture: 8-bit
  • CPU Speed: 4 MHz
  • Program Memory Size: 2 KB
  • RAM Size: 128 bytes
  • Number of I/O Pins: 33
  • Operating Voltage Range: 2.5V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Data Bus Width: 8 bits
  • Oscillator Type: Internal

Detailed Pin Configuration

The PIC16C71-04I/P has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR/VPP - Master Clear input/Voltage Programming input
  9. VSS - Ground
  10. RB0/INT - General-purpose I/O pin/External Interrupt input
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. OSC1/CLKIN - Oscillator input/Clock input
  19. OSC2/CLKOUT - Oscillator output/Clock output
  20. VDD - Power supply voltage
  21. RD0 - General-purpose I/O pin
  22. RD1 - General-purpose I/O pin
  23. RD2 - General-purpose I/O pin
  24. RD3 - General-purpose I/O pin
  25. RD4 - General-purpose I/O pin
  26. RD5 - General-purpose I/O pin
  27. RD6 - General-purpose I/O pin
  28. RD7 - General-purpose I/O pin
  29. VSS - Ground
  30. VDD - Power supply voltage
  31. RC0 - General-purpose I/O pin
  32. RC1 - General-purpose I/O pin
  33. RC2 - General-purpose I/O pin
  34. RC3 - General-purpose I/O pin
  35. RC4 - General-purpose I/O pin
  36. RC5 - General-purpose I/O pin
  37. RC6/TX/CK - General-purpose I/O pin/Transmit data/Serial Clock
  38. RC7/RX/DT - General-purpose I/O pin/Receive data/Data Terminal
  39. VSS - Ground
  40. VDD - Power supply voltage

Functional Features

The PIC16C71-04I/P offers the following functional features:

  • 8-bit RISC architecture for efficient processing
  • Flash program memory for easy reprogramming
  • EEPROM data memory for non-volatile storage
  • Timer modules for precise timing operations
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • Serial communication interfaces (USART, SPI, I2C) for data exchange
  • Interrupt capability for event-driven programming

Advantages and Disadvantages

Advantages

  • Low power consumption enables energy-efficient designs
  • High-performance capabilities allow for complex applications
  • Compact size facilitates integration into space-constrained systems
  • Versatile functionality supports a wide range of applications

Disadvantages

  • Limited program memory size may restrict the complexity of programs
  • Relatively small RAM size may limit data storage capacity
  • Lack of external oscillator option may limit flexibility in clocking options

Working Principles

The PIC16C71-04I/P operates based on the principles of microcontroller architecture. It executes instructions stored in its program memory to perform various tasks. The central processing unit (CPU) fetches instructions, decodes them, and executes the corresponding

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC16C71-04I/P en soluciones técnicas

  1. What is the operating voltage range of PIC16C71-04I/P?
    - The operating voltage range of PIC16C71-04I/P is 2.5V to 6.0V.

  2. What is the maximum frequency at which PIC16C71-04I/P can operate?
    - PIC16C71-04I/P can operate at a maximum frequency of 4 MHz.

  3. Can PIC16C71-04I/P be used in battery-powered applications?
    - Yes, PIC16C71-04I/P's low operating voltage range makes it suitable for battery-powered applications.

  4. What are the key features of PIC16C71-04I/P?
    - Some key features of PIC16C71-04I/P include 18 I/O pins, 8-bit CPU, and 128 bytes of RAM.

  5. Is PIC16C71-04I/P suitable for temperature-sensitive environments?
    - Yes, PIC16C71-04I/P has a wide operating temperature range, making it suitable for various environments.

  6. Can PIC16C71-04I/P be programmed using standard programming tools?
    - Yes, PIC16C71-04I/P can be programmed using standard programming tools such as MPLAB® ICD 4.

  7. What communication interfaces are supported by PIC16C71-04I/P?
    - PIC16C71-04I/P supports serial communication interfaces such as USART and SPI.

  8. Is PIC16C71-04I/P suitable for motor control applications?
    - Yes, PIC16C71-04I/P can be used for simple motor control applications due to its GPIO capabilities.

  9. What development boards are compatible with PIC16C71-04I/P?
    - Development boards such as PICDEM™ Lab II are compatible with PIC16C71-04I/P for rapid prototyping.

  10. Are there any application notes or reference designs available for PIC16C71-04I/P?
    - Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC16C71-04I/P in technical solutions.