Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC17C42A-33/P
Ver Detalle Hojas de datos

PIC17C42A-33/P

Product Overview

Category

The PIC17C42A-33/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and managing tasks.

Characteristics

  • High-performance 8-bit microcontroller
  • Low power consumption
  • Wide operating voltage range
  • Large program memory capacity
  • Multiple communication interfaces
  • Enhanced peripheral features

Package

The PIC17C42A-33/P is available in a compact and durable package, suitable for surface mount technology (SMT) applications.

Essence

The essence of the PIC17C42A-33/P lies in its ability to provide efficient and reliable control functions in a wide range of applications.

Packaging/Quantity

The microcontroller is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Architecture: 8-bit RISC
  • CPU Speed: 33 MHz
  • Program Memory Size: 16 KB
  • RAM Size: 368 bytes
  • Data EEPROM Size: 256 bytes
  • Number of I/O Pins: 35
  • Operating Voltage Range: 2.5V to 5.5V
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3 timers, 1 watchdog timer
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The PIC17C42A-33/P has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RC6/TX - UART transmit pin
  18. RC7/RX - UART receive pin
  19. RB0/INT - External interrupt input
  20. RB1 - General-purpose I/O pin
  21. RB2 - General-purpose I/O pin
  22. RB3 - General-purpose I/O pin
  23. RB4 - General-purpose I/O pin
  24. RB5 - General-purpose I/O pin
  25. RB6 - General-purpose I/O pin
  26. RB7 - General-purpose I/O pin
  27. RB8 - General-purpose I/O pin
  28. RB9 - General-purpose I/O pin
  29. RB10 - General-purpose I/O pin
  30. RB11 - General-purpose I/O pin
  31. RB12 - General-purpose I/O pin
  32. RB13 - General-purpose I/O pin
  33. RB14 - General-purpose I/O pin
  34. RB15 - General-purpose I/O pin
  35. MCLR/VPP - Master Clear/Voltage Programming Pin

Functional Features

The PIC17C42A-33/P offers a range of functional features, including:

  • High-speed processing capabilities
  • On-chip program memory and data EEPROM
  • Multiple communication interfaces for seamless connectivity
  • Enhanced peripheral features for versatile applications
  • Efficient power management options
  • Built-in timers and counters for precise timing operations
  • Analog-to-Digital Converter (ADC) for analog signal processing

Advantages and Disadvantages

Advantages

  • High-performance microcontroller suitable for demanding applications
  • Low power consumption extends battery life in portable devices
  • Ample program memory capacity allows for complex code implementation
  • Versatile communication interfaces enable seamless integration with other devices
  • Enhanced peripheral features provide flexibility in system design

Disadvantages

  • Limited RAM size may restrict the complexity of data manipulation
  • Lack of built-in hardware encryption may pose security concerns in certain applications
  • Higher cost compared to some lower-end microcontrollers

Working Principles

The PIC17C42A-33/P operates based on an 8-bit Reduced Instruction Set Computer (RISC) architecture. It executes instructions stored in its program memory, manipulating data from various sources using its central processing unit (CPU). The microcontroller interacts with external devices through its I/O pins and communication interfaces, enabling control and communication within a system.

Detailed Application Field Plans

The

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC17C42A-33/P en soluciones técnicas

  1. What is the operating voltage range of PIC17C42A-33/P?
    - The operating voltage range of PIC17C42A-33/P is 4.5V to 5.5V.

  2. What is the maximum clock frequency supported by PIC17C42A-33/P?
    - PIC17C42A-33/P supports a maximum clock frequency of 33 MHz.

  3. Can PIC17C42A-33/P be used for motor control applications?
    - Yes, PIC17C42A-33/P can be used for motor control applications with its integrated PWM modules.

  4. Does PIC17C42A-33/P have built-in analog-to-digital converters (ADC)?
    - No, PIC17C42A-33/P does not have built-in ADCs.

  5. What are the communication interfaces supported by PIC17C42A-33/P?
    - PIC17C42A-33/P supports UART, SPI, and I2C communication interfaces.

  6. Is PIC17C42A-33/P suitable for battery-powered applications?
    - Yes, PIC17C42A-33/P is suitable for battery-powered applications due to its low power consumption.

  7. Can PIC17C42A-33/P be programmed using C language?
    - Yes, PIC17C42A-33/P can be programmed using C language with appropriate compilers.

  8. What are the available memory options in PIC17C42A-33/P?
    - PIC17C42A-33/P has 8KB of program memory and 368 bytes of data memory.

  9. Does PIC17C42A-33/P have hardware multiply and divide capabilities?
    - No, PIC17C42A-33/P does not have hardware multiply and divide capabilities.

  10. Can PIC17C42A-33/P be used in industrial automation applications?
    - Yes, PIC17C42A-33/P can be used in industrial automation applications for control and monitoring tasks.