Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC18F44J11-I/PT
Ver Detalle Hojas de datos

PIC18F44J11-I/PT

Product Overview

Category

The PIC18F44J11-I/PT belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash program memory
  • Low power consumption
  • Wide operating voltage range
  • Enhanced peripheral integration

Package

The PIC18F44J11-I/PT is available in a PT package, which stands for Plastic Thin Quad Flat Pack. This package offers a compact and lightweight form factor suitable for space-constrained designs.

Essence

The essence of the PIC18F44J11-I/PT lies in its ability to provide efficient and reliable control and processing capabilities in a wide range of electronic applications.

Packaging/Quantity

This microcontroller is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller Family: PIC18
  • Core Size: 8-bit
  • Program Memory Size: 32KB (Flash)
  • RAM Size: 2KB
  • Operating Voltage Range: 2.3V to 5.5V
  • Maximum Speed: 40 MHz
  • Number of I/O Pins: 36
  • ADC Channels: 10
  • UART Modules: 1
  • SPI Modules: 1
  • I2C Modules: 1
  • Timers: 4
  • Comparators: 2

Detailed Pin Configuration

The PIC18F44J11-I/PT has a total of 36 pins, each serving a specific purpose. The pin configuration is as follows:

  • Pin 1: VDD - Power Supply
  • Pin 2: RA0/AN0 - Analog Input/Output
  • Pin 3: RA1/AN1 - Analog Input/Output
  • Pin 4: RA2/AN2 - Analog Input/Output
  • Pin 5: RA3/AN3 - Analog Input/Output
  • Pin 6: RA4/T0CKI/C1OUT - Timer0 Clock Input/Comparator Output
  • Pin 7: RA5/AN4/SS/HLVDIN - Analog Input/Output/Slave Select/Input for High/Low Voltage Detect
  • Pin 8: VSS - Ground
  • Pin 9: RB0/INT0/FLT0 - External Interrupt 0/Input for Fault Detection
  • Pin 10: RB1/INT1/SDI1 - External Interrupt 1/SPI Data Input
  • Pin 11: RB2/INT2/SDO1 - External Interrupt 2/SPI Data Output
  • Pin 12: RB3/CCP2/P1A - Capture/Compare/PWM 2/Input for CCP Module 2
  • Pin 13: RB4/PGM - Programming/Data Memory
  • Pin 14: RB5/PGC - Programming Clock
  • Pin 15: RB6/PGD - Programming Data
  • Pin 16: RB7/PGM - Programming/Data Memory
  • Pin 17: VDD - Power Supply
  • Pin 18: VSS - Ground
  • Pin 19: RC0/T1OSO/T1CKI - Timer1 Oscillator Output/Timer1 Clock Input
  • Pin 20: RC1/T1OSI/CCP2 - Timer1 Oscillator Input/Capture/Compare/PWM 2
  • Pin 21: RC2/CCP1 - Capture/Compare/PWM 1
  • Pin 22: RC3/SCK/SCL - SPI/I2C Clock
  • Pin 23: RC4/SDO/SDA - SPI Data Output/I2C Data
  • Pin 24: RC5/SDI/HLVDOUT - SPI Data Input/High/Low Voltage Detect Output
  • Pin 25: VDD - Power Supply
  • Pin 26: VSS - Ground
  • Pin 27: RE0/RD/AN5 - Port E Bit 0/Reset/Input for Read/Analog Input/Output
  • Pin 28: RE1/WR/AN6 - Port E Bit 1/Write/Input for Read/Analog Input/Output
  • Pin 29: RE2/CS/AN7 - Port E Bit 2/Chip Select/Input for Analog Input/Output
  • Pin 30: RE3/AN8 - Port E Bit 3/Analog Input/Output
  • Pin 31: RE4/AN9 - Port E Bit 4/Analog Input/Output
  • Pin 32: RE5/AN10 - Port E Bit 5/Analog Input/Output
  • Pin 33: RE6/

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC18F44J11-I/PT en soluciones técnicas

  1. What is the maximum operating frequency of PIC18F44J11-I/PT?
    - The maximum operating frequency of PIC18F44J11-I/PT is 64 MHz.

  2. How many I/O pins does PIC18F44J11-I/PT have?
    - PIC18F44J11-I/PT has 35 I/O pins.

  3. What are the communication interfaces supported by PIC18F44J11-I/PT?
    - PIC18F44J11-I/PT supports SPI, I2C, and UART communication interfaces.

  4. Can PIC18F44J11-I/PT be used for battery-powered applications?
    - Yes, PIC18F44J11-I/PT is suitable for battery-powered applications due to its low power consumption features.

  5. What programming languages can be used to program PIC18F44J11-I/PT?
    - PIC18F44J11-I/PT can be programmed using C, Assembly, and other high-level languages supported by Microchip's MPLAB IDE.

  6. Does PIC18F44J11-I/PT have built-in analog-to-digital converters (ADC)?
    - Yes, PIC18F44J11-I/PT has 10-bit ADC modules for analog signal conversion.

  7. Is PIC18F44J11-I/PT suitable for motor control applications?
    - Yes, PIC18F44J11-I/PT can be used for motor control applications with its PWM and timer modules.

  8. What is the operating voltage range of PIC18F44J11-I/PT?
    - PIC18F44J11-I/PT operates within a voltage range of 2.0V to 5.5V.

  9. Can PIC18F44J11-I/PT be used in temperature-sensitive environments?
    - Yes, PIC18F44J11-I/PT has a wide operating temperature range, making it suitable for temperature-sensitive environments.

  10. Are there any development boards available for PIC18F44J11-I/PT?
    - Yes, there are development boards specifically designed for PIC18F44J11-I/PT, which facilitate rapid prototyping and testing of technical solutions.