Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC18LF26K83T-I/SS
Ver Detalle Hojas de datos

PIC18LF26K83T-I/SS

Product Overview

Category

The PIC18LF26K83T-I/SS belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit architecture
  • Low power consumption
  • Enhanced core with integrated peripherals
  • Wide operating voltage range
  • Large program memory capacity
  • Multiple communication interfaces
  • Advanced analog-to-digital conversion capabilities

Package

The PIC18LF26K83T-I/SS is available in a SSOP package, which stands for Shrink Small Outline Package. This package offers a compact size and good thermal performance.

Essence

The essence of the PIC18LF26K83T-I/SS lies in its ability to provide efficient control and processing capabilities in a small form factor, making it suitable for a wide range of applications.

Packaging/Quantity

This microcontroller is typically sold in reels or tubes, containing a specific quantity of units per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Microcontroller Family: PIC18
  • Core Size: 8-bit
  • Program Memory Size: 32 KB
  • RAM Size: 2 KB
  • Number of I/O Pins: 25
  • Operating Voltage Range: 1.8V to 5.5V
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC) Resolution: 10-bit
  • Clock Speed: Up to 64 MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC18LF26K83T-I/SS has a total of 25 pins, each serving a specific purpose. Here is a detailed pin configuration:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RC0 - General-purpose I/O pin
  18. RC1 - General-purpose I/O pin
  19. RC2 - General-purpose I/O pin
  20. RC3 - General-purpose I/O pin
  21. RC4 - General-purpose I/O pin
  22. RC5 - General-purpose I/O pin
  23. RC6 - General-purpose I/O pin
  24. RC7 - General-purpose I/O pin
  25. VSS - Ground

Functional Features

The PIC18LF26K83T-I/SS offers several functional features that enhance its performance and versatility:

  • Enhanced Core: The microcontroller's core is optimized for efficient execution of instructions, resulting in improved overall performance.
  • Integrated Peripherals: It includes various peripherals such as timers, UART, SPI, I2C, and ADC, which enable seamless integration with external devices.
  • Low Power Consumption: The microcontroller is designed to operate efficiently with minimal power consumption, making it suitable for battery-powered applications.
  • Wide Operating Voltage Range: It can operate within a wide voltage range, allowing flexibility in different power supply configurations.
  • Large Program Memory Capacity: With 32 KB of program memory, it can accommodate complex code and support extensive functionality.
  • Advanced Analog-to-Digital Conversion: The 10-bit ADC provides accurate conversion of analog signals into digital values, enabling precise measurement and control.

Advantages and Disadvantages

Advantages

  • High-performance architecture for efficient processing
  • Low power consumption for extended battery life
  • Integrated peripherals simplify system design
  • Wide operating voltage range for flexibility
  • Ample program memory capacity for complex applications
  • Advanced analog-to-digital conversion capabilities for accurate measurements

Disadvantages

  • Limited I/O pins compared to some other microcontrollers
  • Higher cost compared to lower-end microcontrollers
  • Steeper learning curve for beginners due to advanced features

Working Principles

The PIC18LF26K83T-I/SS operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with external devices through various communication interfaces, and controls the flow of data within the system. By utilizing its integrated peripherals and core features, it performs

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC18LF26K83T-I/SS en soluciones técnicas

  1. What is the maximum operating frequency of PIC18LF26K83T-I/SS?
    - The maximum operating frequency of PIC18LF26K83T-I/SS is 64 MHz.

  2. Can PIC18LF26K83T-I/SS be used for battery-powered applications?
    - Yes, PIC18LF26K83T-I/SS is suitable for battery-powered applications due to its low power consumption features.

  3. What are the communication interfaces supported by PIC18LF26K83T-I/SS?
    - PIC18LF26K83T-I/SS supports SPI, I2C, and UART communication interfaces.

  4. Is PIC18LF26K83T-I/SS suitable for motor control applications?
    - Yes, PIC18LF26K83T-I/SS can be used for motor control applications with its integrated motor control peripherals.

  5. What are the available memory options in PIC18LF26K83T-I/SS?
    - PIC18LF26K83T-I/SS offers flash memory up to 32 KB and SRAM up to 2 KB.

  6. Can PIC18LF26K83T-I/SS operate in harsh environments?
    - Yes, PIC18LF26K83T-I/SS is designed to operate in harsh environments with its wide operating temperature range and robust design.

  7. Does PIC18LF26K83T-I/SS support analog-to-digital conversion?
    - Yes, PIC18LF26K83T-I/SS features an integrated 10-bit ADC for analog-to-digital conversion.

  8. What development tools are available for programming PIC18LF26K83T-I/SS?
    - Development tools such as MPLAB X IDE and MPLAB Code Configurator support programming and configuration of PIC18LF26K83T-I/SS.

  9. Can PIC18LF26K83T-I/SS be used in automotive applications?
    - Yes, PIC18LF26K83T-I/SS is suitable for automotive applications with its AEC-Q100 qualification and automotive-grade features.

  10. Are there any application notes or reference designs available for PIC18LF26K83T-I/SS?
    - Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC18LF26K83T-I/SS in various technical solutions.